Description
A compact twin-arm wall light finished in satin nickel, measuring 24cm across with a shallow projection that keeps it close to the wall. Each arm rises from a shared backplate and ends in an upright E14 candle holder, ready for the shades of your choosing. A rocker switch sits on the fitting itself, so the light can be turned on and off where you stand rather than from across the room.
We reach for this one in bedrooms, where a pair either side of the bed gives each person their own switch and saves the bedside table for books and a glass of water. It also earns its place in a hallway, a small landing or an alcove beside a chimney breast, anywhere a lamp on a surface would only be knocked. Because the shades are chosen separately, you can match an existing scheme closely: small candle shades in linen or card sit neatly on holders of this size. Two lamps give a soft, even spread rather than a hard pool, and dimmable candle lamps will let you take the level right down for evening.
The satin nickel has a low, quiet sheen that reads as warm silver against pale walls and picks up on other brushed metal in a room, such as door furniture or a mirror frame. Keep it looking its best by wiping the arms and backplate with a dry microfibre cloth now and then, and avoiding cream cleaners or anything abrasive that would dull the finish. It is intended for dry rooms indoors rather than bathroom zones or covered porches. It carries a one year warranty. Candle lamps up to 20W each suit it well, and we would fit LED candles for the sake of the shades; a dimmer, if you want one, is separate. Neither lamps nor shades are included, so do allow for both when you order.
Specification
| Colour |
Satin Nickel |
| Weight |
4.00KG |
| Width |
242mm |
| Height |
175mm |
| Projection |
143mm |
| Materials Used |
Iron |
| Energy Class |
A++ to D |
| Max Energy Class |
A++ |
| Min Energy Class |
D |
| Lamp |
2 x E14 20W max (lamps not included) |
| Lamp Cap |
E14 |
| Recommended Lamp |
LED (Candle C35) |
| Light Distribution |
Ambient |
| Protection Class |
Class 1 - Earth Connection Required |
| Total Power Consumption (W) |
Dependent On Lamps Used (±5%) |
| Input Voltage (V) |
220-240V~50/60Hz |
| Switch |
Yes - Rocker Switch |
| Dimmable |
Yes - Dimmable Lamps Required |
| Dimmer Included |
No |
| IP Rating |
IP20 |
| Warranty |
1yr |
| UKCA/CE |
Yes |
| Base Dimensions (mm) |
D:90mm x H:25mm |
| Plate Dimensions (mm) |
D:110mm x H:1mm |
| Bracket Dimensions (mm) |
L:85mm x W:20mm x H:5mm |
| Shade Included |
No |
| Number of Shades |
2 |
| Pieces Included |
1 |
| Unassembled |
Yes-Shade To Be Attached |
| Installation |
Requires Installation By Qualified Electrician |
| Product Care |
(1) Wipe clean with a dry cloth, do not use any cleaning detergents, do not use rough or coarse material to clean. (2) Ensure light is not illuminated when cleaning. |
| Country of Origin |
China |
Frequently Asked
What size is this wall light?
It measures 242mm wide and 175mm high, and projects 143mm from the wall, so it stays clear of a swinging door or a narrow passage.
Which lamps does it take?
Two E14 candle lamps, ideally the slim C35 shape, up to 20W each. Lamps are not supplied.
Can I dim it?
Yes, provided you fit dimmable candle lamps and a compatible dimmer. Neither is included.
Does it have its own switch?
Yes, there is a rocker switch on the fitting, which makes it useful at a bedside or in a spare room.
Are shades supplied with it?
No, the holders are left bare so you can choose your own small candle shades to suit the room.
How should I clean it?
A dry microfibre cloth is all the satin nickel needs. Keep polishes and abrasive creams away from it.