Description
This 50m HDMI lead from AV:Link uses active fibre optic technology (AOC) to carry the HDMI signal, so you can run it over long distances without the signal degrading the way it can with standard copper cables. It supports video resolutions up to 8K Ultra High Definition at 60Hz, with video bandwidth of up to 48Gb/s. That makes it a practical choice where the source and display sit far apart, such as a projector at one end of a room and a media player at the other.
The cable itself has a 4.8mm outer diameter, which keeps it thin and flexible enough to route around corners and through conduit over its full length. The headshells (the connector housings, sometimes called plug shells in the US) are made from alloy and measure only 19mm wide and 9mm high, so they fit into tight spaces behind wall plates and equipment racks. The connectors are gold plated to help maintain a clean contact over time.
The lead is HDMI 2.1 and HDCP 2.2 compliant, so it works with protected 4K and 8K content from sources that require it. Fibre optic HDMI leads like this one are directional, meaning the source and display ends are marked, so check the labelling when you install it. With signal carried over fibre rather than copper, there is no drop in quality across the 50m run, which is the main reason to choose this type over a passive cable at these lengths.
Specification
| Length |
50m |
| Weight |
1.28KG |
| Conductor |
Active fibre optic (AOC) |
| Max. resolution |
7680 x 4320p @ 60Hz |
| Data transfer rate |
48Gb/s |
| Cable : diameter |
4.8mm |
Frequently Asked
What resolution does this HDMI lead support?
It supports video resolutions up to 8K Ultra High Definition (7680 x 4320p) at 60Hz, with video bandwidth up to 48Gb/s.
How long is the cable?
This lead is 50m long, made possible by the active fibre optic conductor that carries the signal without degradation over the distance.
Is it compatible with HDMI 2.1 devices?
Yes, the lead is HDMI 2.1 and HDCP 2.2 compliant, so it works with protected 4K and 8K content.
Is the cable directional?
Active fibre optic HDMI leads are directional, so the source and display ends are marked. Check the labelling before you connect it.
Will it fit behind a wall plate or in a rack?
The alloy headshells measure only 19mm wide and 9mm high, and the cable is 4.8mm in diameter, so it fits into tight spaces.
Why choose fibre optic over a standard HDMI cable?
Over long runs like 50m, standard copper cables can lose signal quality. Fibre optic carries the signal without degradation across the full length.