Description
This electric projector screen gives you a large 100" viewing area in a 16:9 format, ready for classrooms, auditoriums or places of worship. The screen is housed in a white steel case with mounting brackets on either end, so you can fit it to a ceiling or a wall to suit your room. A built-in electric motor lowers and raises the screen, and you can control it with the in-line switch or the supplied RF remote control.
The matt white surface has a gain of 1.1 and a 100 degree viewing angle, with a 40mm black border around the edge to sharpen the definition of the projected image. A weighted bottom bar keeps the screen flat and stops it jamming in the case or curling over time. You can set the drop and retract distance with the adjustable limiter, so the screen always stops where you need it. The material is flame retardant and mildew proof, and the low noise motor keeps operation quiet during use.
The screen runs on a 230Vac, 50Hz mains supply, with a 1.5m lead from plug to controller and another 1.5m from controller to housing. The RF remote works on 433.92MHz and takes an LR23A battery, which is supplied. This is the EU version, and the mains cable entry is on the right hand side of the unit. The same range comes in both 4:3 and 16:9 formats and various sizes, so you can match it to your projector and installation.
Specification
| Weight |
13.00KG |
| Housing dimensions |
2520mm x 88mm x 88mm |
| Screen dimensions |
2210mm x 1230mm |
| Max. drop |
1545mm |
| Screen ratio |
16:9 |
| Screen size |
100" (254cm) |
| Power supply |
230Vac, 50Hz |
| Gain |
1.1 |
| Border size |
40mm |
| Viewing angle |
100° |
| Screen colour |
Matte white |
| Remote control frequency |
433.92MHz |
| Battery : remote |
LR23A (supplied) |
| Lead length |
plug to controller: 1.5m |
Downloads
Product Manual
Frequently Asked
How do I control the screen?
You can raise and lower the screen using the in-line switch or the supplied RF remote control, which works at 433.92MHz.
Can I mount it on a ceiling or a wall?
Yes. The steel case has mounting brackets on either end, so you can install it onto ceilings or walls.
What is the black border for?
The 40mm black border around the screen helps sharpen the definition of the projected image.
Can I set where the screen stops?
Yes. An adjustable drop and retract distance limiter lets you set exactly where the screen stops when lowering or raising.
Which side does the mains cable enter?
The mains cable entry is on the right hand side of the unit. This is the EU version of the screen.
Is the remote battery included?
Yes. The remote takes an LR23A battery, which is supplied with the screen.