Aureon LED Alabaster Circular Chandelier 600mm - Brushed Brass

The Aureon is a 600mm circular pendant light built around a continuous ring of natural Spanish alabaster, supported by three brushed brass cradle brackets and hung on slender steel cables. An integrated 40W 3000K LED runs inside the ring, lighting the stone from within and casting warm soft white light through the alabaster itself. The 80mm section gives the ring a substantial profile without making it feel heavy in mid-sized rooms.

Sized for dining tables, kitchen islands, hallways and bedrooms, the Aureon suits ceilings of 2.4m and above. Above a dining table the ring typically sits 700-800mm from the surface; in a hallway or stairwell it reads as a sculptural object that lights itself rather than the floor. The 1500mm cable suspension is adjustable on installation, so the drop can be set to suit the space.

Each section of the ring shows different mineral veining, so no two Aureon pendants light up identically. The pairing of natural alabaster with solid copper brackets in a brushed brass finish gives the fitting a warm, tactile quality that holds its own against both contemporary and more traditional interiors. The 600mm diameter works as a single pendant over a 4-6 seat dining table or, when grouped at staggered heights, as a cluster in a double-height void.

What size room does the Aureon suit?

The 600mm diameter works as a single pendant over a 4-6 seat dining table, a small kitchen island or a hallway. In larger rooms or double-height voids, two or three rings can be hung at staggered heights as a cluster. Ceilings of 2.4m or higher are recommended.

How does the alabaster vary between pieces?

The ring is cut from natural Spanish alabaster, so the veining, tonal variation and translucency differ between sections and between individual pendants. Backlit by the integrated LED, this variation becomes part of the fitting's character rather than a defect.

Is the Aureon dimmable?

The integrated LED runs at 40W on 230V mains and produces 3000K warm white light. Dimmer compatibility depends on the specific dimmer module, so please contact us before pairing with a dimmer to confirm the right driver and switch combination.

How is the alabaster cleaned?

Alabaster is porous and softer than marble. Wipe with a dry, soft microfibre cloth to remove dust. For more stubborn marks, a barely-damp cloth with distilled water is acceptable, but avoid soaking the stone and do not use household sprays, polishes or chemical cleaners.