Description
Our Asymmetric Square Pyramids 3D wall panels bring a sharp, faceted relief to a plain wall. Each white PVC panel is a 50 x 50cm square holding four square pyramids in two rows of two, divided by narrow grooves. The peak of each pyramid sits off-centre, so its triangular facets differ in size and the surface takes on an irregular, angular look rather than a uniform grid of identical points. The relief is 30mm deep, enough for the facets to read clearly from across a room.
These panels suit interior walls in homes, offices, hotels and shops, from a living room or hallway to a reception area or shop counter. Used across one wall, they make a feature wall with real depth. Each facet meets the light at its own angle, so side light from a window or wall lamp throws some faces into shadow and leaves others bright, and the pattern shifts as daylight moves round the room. Under softer, even light the relief settles into a quieter texture, so it works as well in a calm bedroom as in a busy office.
Each panel is made from a 0.8mm PVC sheet. Fitting needs no special equipment: spread adhesive on the back, press the panel onto the wall, cut panels to fit at the edges and fill the joins with filler, wiping them clean as you go. Adhesive and filler are sold separately. When working out how many a wall needs, four panels cover one square metre. PVC is waterproof and low maintenance, so a wipe with a damp cloth keeps the facets clean. For the strongest effect, keep the rest of the wall clear of shelves and frames, and let the pyramids and their shadows do the work.
Specification
| Pattern |
Asymmetric Square Pyramids |
| Colour |
White |
| Material |
PVC |
| Panel Size |
50 x 50cm |
| Relief Depth |
30mm |
| Sheet Thickness |
0.8mm |
| Coverage Per Panel |
0.25m² |
| Fixing |
Adhesive (Sold Separately) |
| Joins |
Filler (Sold Separately) |
| Suitable For |
Interior Walls |
Frequently Asked
What does the Asymmetric Square Pyramids pattern look like?
Each panel holds four square pyramids in two rows of two, with narrow grooves between them. Their peaks sit off-centre, so the triangular facets vary in size and give an irregular, faceted look.
How big is each panel and how many do I need?
Each panel is a 50 x 50cm square, and four panels cover one square metre, so measure your wall in square metres and allow four panels for each one.
How are the panels fixed to the wall?
Spread adhesive across the back of the panel and press it onto the wall. The joins are then filled with filler and wiped clean, and no special equipment is needed.
Do the panels come with adhesive and filler?
No, the panels come on their own, so you will need to buy the adhesive for fixing and the filler for the joins separately before you start.
Can I cut the panels to fit my wall?
Yes, the panels can be cut to fit, so you can finish a run neatly where the wall meets a corner, a ceiling or a skirting board.
How do I clean 3D wall panels like these?
Wipe them over with a damp cloth. PVC is waterproof and low maintenance, so a damp cloth is all the facets and grooves need to stay clean.