Description
Our Asteria wall light keeps its shape simple: a round wall plate holds a long straight arm that reaches out to a flat circular disc shade, and a black fabric cable runs down from the plate to a plug. The disc sits in a warm brass finish, paired with a soft Nuance Rose colour that gives the piece a gentle, rosy tone against the wall. Measuring 15cm in diameter and just 9cm in height, it stays close to the surface while the arm carries the light outward across a depth of 42cm. We range it as a plug-in fitting, so you can position it near a socket without wiring it into the wall.
The long arm makes this wall light well suited to spots where you want light thrown across a surface, whether that is above a reading nook, beside a desk, or over a console table. It is made from steel, aluminium and acrylic, and it weighs a light 804g, with a 2.2m black cord included. The built-in 12W LED panel gives a warm 2700K glow at 500 lumen, and because the lamp is dimmable you can soften the light to suit the hour. With a CRI of 91 and around 50000 lighting hours, colours read truly and the panel lasts well over years of use.
Fitting takes roughly 10 minutes, and if you would rather run it into the wall, please refer to the hardwire user guide for instructions on how to hardwire the Asteria. It carries CE, UKCA and IP2X markings, and we back it with a 10-year warranty, so you can settle it into a room and leave it be. The Nuance Rose finish sits comfortably alongside neutral walls or bolder tones, and we think its long, low profile earns its place in a hallway, bedroom or study.
Specification
| Assembly Time |
10min |
| Height |
9cm |
| Depth |
42cm |
| Diameter |
15cm |
| Weight |
804g |
| Material |
Steel, aluminium and acrylic: Incl. 2.2m black cord |
| Markings, Tests & Certifications |
CE, UKCA, IP2X |
| Additional Information |
Please refer to the hardwire user guide for instructions on how to hardwire the Asteria Wall |
| Warranty |
10-year warranty |
| Lumen |
2700K - 500 lumen |
| Light Information |
≥50000 lighting hours CRI: 91 |
| Light Source |
12W LED panel built-in |
| Dimmable |
This lamp is dimmable |
Downloads
Product Specifications
User Guide
Product Information Sheet
Driver Specification Sheet
Hardwire User Guide
Frequently Asked
How is this wall light wired?
The Asteria Long Wall Light is a plug-in design with a 2.2m black cord, so you can simply plug it into a nearby socket. If you prefer, you can also hardwire it by following the hardwire user guide.
What is the lamp made from?
It is made from steel, aluminium and acrylic, with a brass core colour and a Nuance Rose finish. A black fabric cord and plug are included.
How far does the lamp extend from the wall?
The long arm gives a depth of 44.6cm with hardwire and 42cm without. The circular shade measures 15cm in diameter and the wall plate sits 9cm high.
Can I dim this light?
Yes, this lamp is dimmable. It uses a built-in 12W LED panel giving 500 lumen at 2700K, with a CRI of 91 and a rated life of at least 50000 hours.
How do I clean and care for the lamp?
Wipe the brass and Nuance Rose surfaces gently with a soft dry cloth to keep them clear of dust. Avoid harsh cleaning products on the steel, aluminium and acrylic parts.
Is it difficult to put up?
Assembly takes around 10 minutes and the lamp weighs 804g. It carries CE, UKCA and IP2X markings.