Description
Our Angular Maze 3D wall panels give a plain wall a crisp geometric relief. Raised, flat-topped bars about 3cm wide run across and down each panel and turn at right angles. They form straight runs, L shapes, steps and brackets laid out like a maze, with flat recessed paths between them. There is no smaller repeat within the panel, so the eye follows the routes rather than settling on one motif. Pieces range from a single small square block to straight runs of about 20cm. The bars stand in a relief 12mm deep, enough for their sloped sides to throw clear shadows in side light. Each panel is white PVC, a 50 x 50cm square.
These panels are for interior walls in homes, offices, hotels and shops. A run of them makes a strong feature wall behind a sofa, a bed, a desk or a reception counter. Side by side, the panels read as one wider maze rather than a grid of squares. Because the light changes through the day, the maze reads a little differently from morning to evening, which keeps a large wall interesting. It suits anyone who likes clean lines and order with a little intrigue. Four panels cover one square metre, which keeps the sums simple when you measure up a wall.
Fitting needs no special equipment. Spread adhesive on the back of each panel, press it onto the wall and cut a panel to fit where the wall ends, then fill the joins with filler and wipe them clean. Adhesive and filler are sold separately. Each panel is a 0.8mm sheet, and because PVC is waterproof it is low maintenance: a wipe with a damp cloth is all the bars and paths need. For styling, keep the furniture in front simple and place a lamp to one side so the maze can show itself.
Specification
| Pattern |
Angular Maze |
| Colour |
White |
| Material |
PVC |
| Panel Size |
50 x 50cm |
| Relief Depth |
12mm |
| Sheet Thickness |
0.8mm |
| Coverage Per Panel |
0.25m² |
| Fixing |
Adhesive (Sold Separately) |
| Joins |
Filler (Sold Separately) |
| Suitable For |
Interior Walls |
Frequently Asked
What does the Angular Maze pattern look like?
Raised, flat-topped bars about 3cm wide turn at right angles to make straight runs, L shapes, steps and brackets like a maze, with flat paths between them.
How big is each panel and how many do I need?
Each panel is a 50 x 50cm square, and four of them cover one square metre, so measure your wall in square metres to work out your order.
How are the panels fixed to the wall?
You spread adhesive across the back of the panel and press it firmly onto the wall, and no special equipment is needed for the job.
Do I need to buy anything else?
Yes. You will need adhesive to fix the panels and filler for the joins, and neither comes with the panels, so have both ready before you start.
Can I cut the panels to fit my wall?
Yes, the panels can be cut to fit where your wall ends, and the joins between them are filled with filler and wiped clean for a tidy finish.
How do I clean the panels?
A wipe with a damp cloth is all they need, as PVC is waterproof and the panels are low maintenance from day to day.