Description
The Amberhurst large pendant sets a 450mm shade of Tiffany-style leaded glass on a drop that adjusts from 410mm to 1400mm, so the same ceiling light works over a table or higher up in a hall. The glass is multicoloured and built the traditional way, with each piece cut on its own and joined by soldered seams across a metal frame. A single E27 bulb sits inside, and a 10W LED gives the output the fitting is designed for, which keeps the running cost low. Bulbs are supplied separately, and it dims with a dimmable LED on a compatible dimmer.
A pendant this wide earns its place over a small dining table, a hall table or a stairwell, and it also works well in a sitting room corner where a floor lamp would get in the way. The leaded pattern suits older houses, but it is just as useful in a plain rented flat as the one piece of colour and pattern in the room. It weighs 2.3kg, so a sound ceiling rose will usually take it, though we would have the fixing checked. The fitting is rated IP20 and belongs in dry indoor rooms rather than bathrooms.
The shade is soldered leaded glass on a metal frame, wired as a Class 1 earthed fitting for a qualified electrician to install. Dust it with a dry soft cloth or a soft brush, wipe marks with a barely damp cloth and dry immediately, keeping solvents, polishes and abrasive creams away from the solder lines. Let the bulb cool before changing it. The wider Amberhurst range covers a flush ceiling light, a wall light and a mini table lamp, so the same glass can run from hall to landing to bedside.
Specification
| Bulb Fitting |
1 x E27 |
| Maximum Wattage |
10W (10W per lamp) |
| Dimmable |
Yes |
| IP Rating |
IP20 |
| Class |
Class 1 (earthed) |
| Diameter |
450mm |
| Height |
410-1400mm |
| Weight |
2.3kg |
| Materials |
Glass & Metal |
| Finish |
Multicoloured |
| Warranty |
2 Year |
Frequently Asked
What bulb does it need?
A single E27 bulb, supplied separately. A 10W LED gives the output the pendant is designed around and runs cool inside the shade.
What is the shade made from?
Multicoloured Tiffany-style leaded glass on a metal frame, with every piece cut individually and joined by soldered seams.
What are the dimensions?
The shade is 450mm in diameter and the drop adjusts between 410mm and 1400mm. The fitting weighs 2.3kg.
Can I use it with a dimmer?
Yes, with a dimmable LED bulb and a compatible LED dimmer switch.
How should I clean the glass?
Dust with a dry soft cloth or soft brush, then use a barely damp cloth on marks and dry at once. Nothing abrasive and no solvents near the solder.
Are there matching fittings?
Yes. The Amberhurst range also includes a flush ceiling light, a single wall light and a mini table lamp in the same glass.