Description
These 3D wall panels carry our Alternating Semicircle Fans pattern: semicircular fans, each about half the panel's width, with an outer band, two segments split down the middle and a small inner arc. The fans sit in facing pairs whose curved edges meet, across the width in two diagonally opposite quarters and across the height in the other two, so each panel holds eight fans in a basket-weave repeat with curved triangular gaps between them. The raised bands and segments are flat-topped with crisp bevelled edges, so the relief casts moderate shadows that give the curves real depth. Each panel is white PVC and a 50cm square.
They are made for interior walls in homes, offices, hotels and shops, and a run of them makes a feature wall behind a bed, a sofa, a reception desk or a shop counter. Because the pattern turns direction from one quarter to the next, the wall reads as a woven geometric field rather than rows of the same shape. Light falling from one side picks out every bevelled band and leaves soft shadow in the gaps, so the curves come forward beside a window or under a wall washer, while in even light the wall settles into a calm texture.
The panels are formed from a 0.8mm PVC sheet, and PVC is waterproof, so day-to-day care is simply a wipe with a damp cloth. To fit them, spread adhesive on the back of each panel and press it onto the wall, cut panels to fit at the edges, then fill the joins with filler and wipe them clean; no special equipment is needed. Adhesive and filler are sold separately. Four panels cover one square metre, which makes it easy to work out how many a wall needs. For the strongest effect, choose a wall that light falls across from the side.
Specification
| Pattern |
Alternating Semicircle Fans |
| Colour |
White |
| Material |
PVC |
| Panel Size |
50 x 50cm |
| Sheet Thickness |
0.8mm |
| Coverage Per Panel |
0.25m² |
| Fixing |
Adhesive (Sold Separately) |
| Joins |
Filler (Sold Separately) |
| Suitable For |
Interior Walls |
Frequently Asked
What does the Alternating Semicircle Fans pattern look like?
Eight semicircular fans sit in facing pairs on each panel, turning direction from one quarter to the next, so the wall reads as a basket-weave of curves with small curved triangular gaps between them.
How big is each panel and how many will I need?
Each panel is a 50 x 50cm square, and four panels cover one square metre, so measure your wall in square metres to work out how many you need.
How are these 3D wall panels fixed to the wall?
Spread adhesive on the back of each panel and press it onto the wall, then fill the joins with filler and wipe them clean. No special equipment is needed.
What else do I need to fit the panels?
The adhesive for fixing and the filler for the joins are both sold separately, so pick them up alongside your panels before you start.
Can the panels be cut to fit my wall?
Yes, the panels can be cut to fit, so you can trim them neatly where the wall meets a ceiling, a corner or the skirting.
How do I clean the panels?
Wipe them over with a damp cloth. PVC is waterproof, so the raised bands and bevelled edges are low maintenance and easy to keep looking fresh.