Description
The Alina round is a shallow gypsum disc that sits close against the wall, giving light from two integrated LED sources rather than a lamp on show. At 16cm across it reads as a small circle of light instead of a fitting competing for attention, and the warm 3000K output keeps the glow gentle. There is no dimming and no switch on the body, so it runs from whichever wall switch controls the circuit.
We reach for it in hallways and on stair walls, where a projecting shade would be in the way, and in pairs either side of a bed or a chimney breast. It suits anyone who wants the lit surface to do the talking while the fitting itself stays quiet. Because gypsum takes emulsion, we would paint it the same colour as the wall behind and let it vanish, or pick the disc out in a contrast if you would rather it was noticed. Keep it to dry rooms indoors; a bathroom or a porch wants something sealed instead.
The body is cast gypsum in a paintable white, matt to the touch and happy under a roller or brush. Gypsum is porous, so dust it with a dry soft brush and keep water, sprays and cleaning fluids off the surface; small scuffs can be touched in with the paint you used on the wall. The LEDs are built in, so there is nothing to change over its life. It carries a three year warranty. We stock the wider range in square and sphere forms, along with up and down cylinders and paintable pendants, if you want one language of light through a whole room.
Specification
| Colour |
White Paintable |
| Ceiling Mountable |
Yes |
| Weight |
0.73KG |
| Diameter |
155mm |
| Projection |
60mm |
| Materials Used |
Iron, Gypsum |
| Energy Class |
F |
| Max Energy Class |
F |
| Min Energy Class |
F |
| Lamp |
2 x 6.5W integrated LED (no lamps to fit) |
| Lamp Cap |
Integral LED |
| Recommended Lamp |
Integral LED |
| Colour Temperature |
3000K Warm White (±5%) |
| Number of Switching Cycles |
10000 |
| System Flux |
656lm (±5%) |
| Light Distribution |
Up & Down |
| Protection Class |
Class 1 - Earth Connection Required |
| Total Power Consumption |
6.5W (±5%) |
| Input Voltage |
220-240V~50/60Hz |
| Switch |
Not Switched |
| Dimmable |
No |
| IP Rating |
IP20 |
| Warranty |
3yrs |
| UKCA/CE |
Yes |
| Shade Colour |
White Paintable |
| Pieces Included |
1 |
| Installation |
Requires Installation By Qualified Electrician |
| Product Care |
(1) Wipe clean with a dry cloth, do not use any cleaning detergents, do not use rough or coarse material to clean. (2) Ensure light is not illuminated when cleaning. |
| Country of Origin |
China |
Frequently Asked
How much light does it give?
It produces 656 lumens from 6.5W of integrated LED, at 3000K warm white.
Can I really paint it?
Yes. The gypsum is supplied in a paintable white and takes standard emulsion, so it can be finished to match the wall exactly.
How far does it stand off the wall?
Projection is 60mm, so it stays clear of heads and shoulders in a corridor.
Is it dimmable?
No, it is non-dimmable, and it has no switch on the body.
Will the LEDs need replacing?
The LED is integral to the fitting rather than a changeable lamp, so there is nothing to swap out in normal use.
What does it weigh and how big is it?
It measures 155mm in diameter and weighs 0.73kg.