Alexandra Tall 3 Light Crystal Wall Light - Gold

The Alexandra Tall is a 440mm crystal wall light with three E14 bulb fittings arranged vertically behind cascading strands of Asfour and Diyas crystal droplets and clear spheres, set on a gold-finished metal frame. Two horizontal crystal-encrusted bands bracket the central strand section, the upper band sitting at the ceiling plate and the lower band forming a decorative tier midway down the fixture.

Designed for tall walls in formal entryways, dining rooms and hallways with ceiling heights of 2.7m or above, the Alexandra provides accent lighting rather than primary illumination. The 160mm projection from the wall means the fixture sits clear of tall skirting boards and chair rails. The vertical orientation draws the eye upward and suits narrow wall sections between doorways or alongside mirrors where a wider sconce would not fit.

The gold finish on the frame and crystal bands carries a warm antique tone rather than bright yellow gold, pairing with brass, bronze and warm-toned wood finishes in traditional and transitional interiors. The combined weight of metal frame and crystal strands is 2.1kg, requiring secure fixing into a solid wall or into studs behind plasterboard. Each of the three E14 bulbs can be dimmed using dimmable bulbs and a compatible dimmer switch, allowing the intensity to be adjusted for evening use.

What bulbs does the Alexandra Tall take?

Three E14 small Edison screw bulbs, up to 60W each. Bulbs are sold separately. Most users pair this with 4-6W warm-white LED candle bulbs at 2700K for decorative ambient light without excessive heat or glare through the crystal.

Is it dimmable?

Yes, when fitted with dimmable E14 bulbs and connected to a compatible dimmer switch. The dimming performance depends on the specific bulb and dimmer combination — LED bulbs typically require trailing-edge dimmers rather than older leading-edge types.

What wall fixings are needed?

The 2.1kg weight requires secure wall fixings. On solid brick or block walls, use appropriate wall plugs and screws. On plasterboard or stud walls, fix into studs or use plasterboard fixings rated for at least 5kg. The backplate has pre-drilled mounting holes.

How is the crystal cleaned?

Switch off at the mains before cleaning. Wipe each crystal drop individually with a dry microfibre cloth. For more thorough cleaning, a barely-damp cloth with distilled water works, but avoid soaking the metal fittings or allowing water to run into the bulb holders. Do not use household glass cleaners or sprays.