Description
The Aethera 3 Light ceiling lamp holder is the white body of a flush ceiling light, built to carry one large Aethera lampshade from the same range. Three short cylindrical E27 lamp holders spread out from a round ceiling plate, and the whole fitting measures 24cm across and 6cm deep. Please note what arrives in the box: the lamp holder alone. The lampshade is sold separately and the bulbs are not included, so it becomes a finished light only once you add an Aethera shade and three E27 bulbs. It is rated IP20, which settles where it belongs: indoors, in dry rooms only.
It suits living rooms, bedrooms, dining rooms and hallways where you want one generous shade close to the ceiling rather than a pendant on a long drop. The body itself is only 6cm deep, so almost all the height of the finished light comes from the shade you choose. Because the three holders are spaced apart, the bulbs sit across the width of the shade rather than bunched at one central point, and the maker describes the emission as diffuse. The plain white finish sits quietly against a painted ceiling, which leaves the shade free to set the look of the room.
Each of the three E27 lamp holders takes a bulb of up to 15W, and the fitting is not dimmable, so it is not one to put on a dimmer switch. The maker states that no separate power supply is needed, and gives an operating temperature range of 0°C to 40°C. The fitting weighs 0.85KG. As with any mains light, it should be installed by a qualified electrician. Our practical tip: order your Aethera shade and three E27 bulbs at the same time, so the finished light can go up in one visit.
Specification
| Diameter |
240mm |
| Height |
60mm |
| Lamp Fitting |
3 x E27 |
| Maximum Wattage |
3 x 15W |
| Bulb Included |
No |
| Not Included |
Lampshade |
| Dimmable |
No |
| Finish |
White |
| IP Rating |
IP20 |
| Class |
Class II |
| Operating Temperature |
0°C to 40°C |
| Certification |
CE |
| Weight |
0.85KG |
| Warranty |
5 Years |
Downloads
Installation Instructions (PDF)
Frequently Asked
Does the Aethera 3 Light ceiling lamp holder come with a lampshade?
No. It is the body of the light only. The lampshade is sold separately, and you add one Aethera lampshade from the same range to complete it.
Which bulbs does it take?
It takes three E27 bulbs of up to 15W each. Bulbs are not included, so you will need to buy three alongside the fitting.
Can I use it with a dimmer switch?
No. The fitting is not dimmable, so we would keep it on an ordinary switch rather than a dimmer.
How big is the fitting?
The fitting measures 24cm across and 6cm deep and weighs 0.85KG. The overall size of the finished light depends on the Aethera shade you add.
Which rooms can it go in?
It is rated IP20, so it is for indoor, dry rooms only, such as a living room, bedroom, dining room or hallway.
What finish is it?
It comes in a plain white finish, which sits quietly against a painted ceiling and lets your chosen Aethera shade set the look.