Description
The Aethera pendant light fitting is the body of a modular light: a black ceiling rose, a black flex and a black E27 lamp holder, sold without its shade. On its own it is not a complete light. To finish it, you add one of the range's lampshades or diffuser discs, sold separately, along with an E27 bulb of your choice, since no bulb comes in the box either. The cylindrical lamp holder is a slim 45mm across, and the drop adjusts from 327mm to 2045mm, so the shade can hang close to the ceiling or low over a table. It is rated IP20, which settles where it belongs: indoors, in dry rooms only.
Because the body stays the same and the shade sets the look, this is a fitting for anyone who likes to style a room in two steps. Hang it over a dining table, where the long drop lets the light sit low above the people seated there, or keep it short in a hallway or on a landing where the ceiling is modest. The black finish looks crisp and quiet against a pale ceiling, and it lets whichever shade you choose take the attention. Later, if your taste changes, you swap the shade rather than the whole light.
The fitting takes a single E27 bulb of up to 42W, and it is not dimmable, so it is not for use with a dimmer switch. It runs on 220-240V AC and needs no separate driver or power supply. It is designed to work in room temperatures from 0°C to 40°C, and the whole set weighs 0.35KG. As a mains product, it should be installed by a qualified electrician. Our practical tip: choose your shade and bulb before the fitting is hung, then set the drop with the shade's height in mind, so the finished light hangs exactly where you want it.
Specification
| Lamp Holder Diameter |
45mm |
| Drop |
Adjustable, 327mm to 2045mm |
| Lamp Fitting |
E27 |
| Maximum Wattage |
42W |
| Bulb Included |
No |
| Not Included |
Lampshade, diffuser disc |
| Dimmable |
No |
| Finish |
Black |
| IP Rating |
IP20 |
| Class |
Class II |
| Voltage |
220-240V AC |
| Operating Temperature |
0°C to 40°C |
| Certification |
CE |
| Weight |
0.35KG |
| Warranty |
5 Years |
Downloads
Installation Instructions (PDF)
Frequently Asked
Does the Aethera pendant fitting come with a lampshade?
No. It comes as a ceiling rose, flex and E27 lamp holder only. The range's lampshades and diffuser discs are sold separately, and no bulb is included.
Which bulb does this pendant light take?
It takes a single E27 bulb of up to 42W. No bulb is included in the box, and the fitting is not dimmable.
How long is the drop on this pendant?
The drop adjusts from 327mm to 2045mm, so you can hang the shade close to the ceiling or low over a dining table.
Can I use this pendant fitting with a dimmer switch?
No. The fitting is not dimmable, so it is not for use with a dimmer switch, whichever E27 bulb you choose.
Which rooms suit this IP20 pendant?
It is rated IP20, so it belongs indoors in dry rooms only, such as a dining room, living room, hallway, landing or bedroom.
Is the black finish the same on every part?
Yes. The ceiling rose, the flex and the lamp holder are all finished in black, which looks crisp and quiet against a pale ceiling.