Free Delivery on all orders over £99*

3-Phase Track Trinity End Cap - White

£299
The RRP is the manufacturer's recommended retail price of the item.
Limited Stock
We are an Independent UK Company
Price match. Found it cheaper? Contact us
Trade Discount Available
Description

The Maytoni Trinity end cap is a white plastic component that closes the open end of a 3-phase surface-mounted track lighting system. Measuring 31mm wide by 33mm high, it clips onto the track profile to seal the electrical conductors at unused termination points, preventing accidental contact and keeping dust out of the track interior.

Installed at track ends where no further extension or power feed is needed, the end cap gives a finished appearance to the track run and maintains electrical safety standards. The white plastic construction matches the Trinity track body colour, creating a continuous line when fitted. Installation requires no tools — the cap pushes onto the track end and locks in place with a friction fit.

The Trinity system uses a recessed 3-phase conductor design, meaning the end cap must fit the Trinity profile specifically. It will not fit other manufacturers' track systems or Maytoni's single-phase profiles. Each track run requires one end cap at the terminal point, plus a power feed connector at the live end.

Specification
Height 3.3cm
Length 3.1cm
Width 3.3cm
Finish White
Construction Plastic
Warranty 2 Year Guarantee
Downloads

Product Manual

Frequently Asked

Is this compatible with all 3-phase track systems?

No. This end cap fits the Maytoni Trinity 3-phase track profile only. It will not fit other manufacturers' track systems or Maytoni's single-phase profiles due to differences in the conductor recess design and outer dimensions.

How is it fitted?

The end cap pushes onto the open end of the track and locks in place with a friction fit. No tools are required. The cap should be fitted after the track is mounted and before power is connected.

How many end caps are needed per track run?

One end cap is needed at the terminal end of each track run. The opposite end connects to a power feed or track coupler. A typical straight track installation uses one end cap and one power feed connector.

Shipping & Returns

Free worldwide delivery

Free worldwide delivery on all orders over £99. International orders for third-party brand products may be subject to an additional courier surcharge based on volumetric weight, particularly on larger lighting fixtures — if a surcharge applies, our team will email you with the amount before dispatch and you can proceed or cancel for a full refund. See full delivery terms.

Returns

30-day returns window from delivery. As all our products are electrical or lighting goods, returned items must be inspected and recertified by a qualified electrician before resale — the cost of this inspection (25–40% of the item value) is deducted from your refund. Customers pay return shipping. Made-to-order, special-order and clearance items cannot be returned. See full returns policy.

You Might Also Like

Recommended For You

    Our Reviews

    From first click to final installation, our customers share how Niori lights up their spaces. Read their words and envision what’s possible for yours.

    Featured Projects

    Step into our portfolio and see how we transform homes, restaurants, and commercial spaces and more, worldwide. Click here for a closer look at our latest projects.

    Description

    The Maytoni Trinity end cap is a white plastic component that closes the open end of a 3-phase surface-mounted track lighting system. Measuring 31mm wide by 33mm high, it clips onto the track profile to seal the electrical conductors at unused termination points, preventing accidental contact and keeping dust out of the track interior.

    Installed at track ends where no further extension or power feed is needed, the end cap gives a finished appearance to the track run and maintains electrical safety standards. The white plastic construction matches the Trinity track body colour, creating a continuous line when fitted. Installation requires no tools — the cap pushes onto the track end and locks in place with a friction fit.

    The Trinity system uses a recessed 3-phase conductor design, meaning the end cap must fit the Trinity profile specifically. It will not fit other manufacturers' track systems or Maytoni's single-phase profiles. Each track run requires one end cap at the terminal point, plus a power feed connector at the live end.

    Specification
    Height 3.3cm
    Length 3.1cm
    Width 3.3cm
    Finish White
    Construction Plastic
    Warranty 2 Year Guarantee
    Downloads

    Product Manual

    Frequently Asked

    Is this compatible with all 3-phase track systems?

    No. This end cap fits the Maytoni Trinity 3-phase track profile only. It will not fit other manufacturers' track systems or Maytoni's single-phase profiles due to differences in the conductor recess design and outer dimensions.

    How is it fitted?

    The end cap pushes onto the open end of the track and locks in place with a friction fit. No tools are required. The cap should be fitted after the track is mounted and before power is connected.

    How many end caps are needed per track run?

    One end cap is needed at the terminal end of each track run. The opposite end connects to a power feed or track coupler. A typical straight track installation uses one end cap and one power feed connector.

    Shipping & Returns

    Free worldwide delivery

    Free worldwide delivery on all orders over £99. International orders for third-party brand products may be subject to an additional courier surcharge based on volumetric weight, particularly on larger lighting fixtures — if a surcharge applies, our team will email you with the amount before dispatch and you can proceed or cancel for a full refund. See full delivery terms.

    Returns

    30-day returns window from delivery. As all our products are electrical or lighting goods, returned items must be inspected and recertified by a qualified electrician before resale — the cost of this inspection (25–40% of the item value) is deducted from your refund. Customers pay return shipping. Made-to-order, special-order and clearance items cannot be returned. See full returns policy.