Description
Two F-type satellite connections sit side by side on a square plate finished in strawberry. The front clips over its base, so the face is left clean with no visible screwheads, and the plate keeps a shallow profile that reads as part of the wall rather than something added to it. Each connector is threaded, so a satellite lead tightens down and stays where you put it. It takes up no more room than a standard plate, so it sits in line with whatever is already on the wall.
We would reach for this where a receiver needs separate feeds and the alternative is leads trailing across a floor, which usually means a living room, a snug or a main bedroom. It works just as well in a study where television and data cabling run along the same wall. This is a low voltage signal plate for satellite and data circuits, so it stays indoors, in dry rooms, well away from splashes and steam. It is a sensible choice for anyone tidying up a set-up that has grown by degrees.
The plate is moulded in ABS, light in the hand and smooth to the touch, with the strawberry finish running evenly across the face. Keep it looking right by wiping with a barely damp cloth and drying straight after; household sprays and cream cleaners will dull the surface, so leave those in the cupboard. It carries a ten year warranty. Screwless plates look their best when the switches and sockets around them share the same flat front, and this colour sits happily against white walls or a deeper painted finish, which is why we like it in rooms that have a bit of character to them.
Specification
| Colour |
Strawberry |
| Type of Finish |
Colour |
| Weight |
0.07KG |
| Length |
88mm |
| Width |
25mm |
| Height |
88mm |
| Back Box Depth |
25mm |
| Materials Used |
Polycarbonate, Metal |
| Protection Class |
Class 3 - Low Voltage |
| IP Rating |
IP20 |
| Warranty |
10yrs |
| UKCA/CE |
Yes |
| Additional Certification |
BS EN 60669 |
| Number of Gangs |
2 |
| Pieces Included |
1 |
| Installation |
Requires Installation By Qualified Electrician. 25mm Box Depth Is Recommended. |
| Suitable For |
Indoor Use Only. Data circuits. |
| Country of Origin |
China |
Frequently Asked
What size is the plate?
The face measures 88mm by 88mm, and it stands 25mm deep.
What type of connectors does it have?
Two F-type screw connectors, the standard threaded fitting used on satellite leads.
What is it made from?
Moulded ABS, in a strawberry finish, with a screwless front plate that hides the fixings.
Can it go in a bathroom or outside?
No. It is rated IP20 for dry indoor rooms only, on satellite and data circuits.
How should the finish be cleaned?
A barely damp cloth, then dry it off. Avoid solvents, bleach, cream cleaners and anything abrasive, as they will mark the surface permanently.
Is there a warranty?
It carries a ten year warranty from the manufacturer.