Free Delivery on all orders over £99*

2 Gang 2-Way 10-200W Intelligent Dimmer - Gunmetal Flat Plate

$6900
The RRP is the manufacturer's recommended retail price of the item.
60 In Stock - Ready to Ship
We are an Independent UK Company
Price match. Found it cheaper? Contact us
Trade Discount Available
Description

The Knightsbridge FP2192GM is a 2-gang 2-way intelligent dimmer supporting 10-200W incandescent or halogen loads per gang, or 5-150W LED per gang, behind a gunmetal flat plate with matching dimmer caps. Each gang controls a separate lighting zone independently, with rotary dimming action and push on/off switching built into the control knob.

Designed for residential installation where two separate circuits need dimming control from a single faceplate, the dimmer switches between Trailing-edge mode (pre-set, suits most LED and electronic transformers) and Leading-edge mode (suits resistive loads and magnetic transformers) via the front control knob. Trimming adjustments, mode switching and factory reset are all accessible from the front plate without removing the dimmer from the wall, which simplifies commissioning and troubleshooting on site.

The flat plate construction projects just 2.5mm from the wall once fitted to a 25mm minimum back box, giving a lower profile than standard screw-fixed faceplates. The gunmetal finish is a dark grey with subtle metallic sheen that pairs well with contemporary interiors, industrial schemes and monochrome colour palettes. The dimmer includes overload and overheat protection, plus an integrated Inrush Current Limiter (ICL) to manage high inrush current when LED loads are first switched on.

The dimmer is not recommended for mixed-load installations where different lamp brands, wattage ratings or lamp types are combined on a single gang. For best performance, each gang should control identical lamps of the same wattage from the same manufacturer.

Specification
Height 87.5 mm
Width 87.5 mm
Projection 2.5 mm
Min. Mounting Box Depth 25mm
Construction Premium grade steel
Finish Gunmetal
Class I
IP Rating IP20
Primary Voltage 230V 50Hz
Earth Terminal Yes
Terminal Screw
Warranty 2
Downloads

Product Specification Sheet

Frequently Asked

What's the difference between Trailing-edge and Leading-edge mode?

Trailing-edge mode (pre-set on this dimmer) suits most LED lamps and electronic transformers by cutting the trailing edge of the AC waveform. Leading-edge mode suits resistive loads like incandescent bulbs and magnetic transformers by cutting the leading edge. The mode can be switched via the front control knob without removing the dimmer from the wall.

Can I mix LED and halogen bulbs on one gang?

No. Knightsbridge recommends against mixing lamp types, brands or wattages on a single gang. Each gang should control identical lamps from the same manufacturer for reliable dimming performance and to avoid flicker or incompatibility.

What back box depth is required?

A 25mm minimum back box depth is needed for safe installation. The flat plate adds 2.5mm of projection from the wall once fitted, giving a total of approximately 27.5mm from the wall surface to the front of the faceplate.

How is the minimum brightness adjusted?

The dimmer has a trim adjustment accessible via the front control knob. This allows the minimum brightness level to be set during installation to prevent the lamps cutting out at the lower end of the dimming range or flickering when dimmed low.

Shipping & Returns

Delivery UK delivery is £14.99, and delivery is free on all orders of £99 or more, in the UK and internationally.

Returns If you change your mind, you have 14 days from delivery to tell us, and a further 14 days to send the goods back. Return postage for a change-of-mind return is paid by you. Change-of-mind returns are subject to an inspection and handling deduction. See our full returns policy.

To arrange a return, call us on 020 8149 5199 or use our contact page.

See it lit, in person

Lighting looks different in a real room. Come and see our range at our showrooms in Birmingham, Hong Kong and Dubai, or talk to our design team wherever you are.

Niori lighting showroom trailer video with closeups of alabaster lighting

Why Niori

Over 20 years lighting homes worldwide

We are a specialist lighting and mirror retailer with showrooms in Birmingham, Hong Kong and Dubai, shipping to customers around the world. Our own design team is here to help, from first idea to final fitting.

Genuine products

An authorised stockist

Every product arrives brand new with the full manufacturer warranty. Found it cheaper elsewhere? Ask us about a price match.

Installation

Fits standard UK back boxes

Designed to fit standard UK back boxes for a straightforward swap of your existing fittings.

Ordering with us

Free delivery over £99

Free delivery on orders over £99, in the UK and worldwide. Easy returns within 14 days, subject to our returns policy. Full manufacturer warranty included.

You Might Also Like

Recommended For You

    Our Reviews

    From first click to final installation, our customers share how Niori lights up their spaces. Read their words and envision what’s possible for yours.

    Featured Projects

    Step into our portfolio and see how we transform homes, restaurants, and commercial spaces and more, worldwide. Click here for a closer look at our latest projects.

    Description

    The Knightsbridge FP2192GM is a 2-gang 2-way intelligent dimmer supporting 10-200W incandescent or halogen loads per gang, or 5-150W LED per gang, behind a gunmetal flat plate with matching dimmer caps. Each gang controls a separate lighting zone independently, with rotary dimming action and push on/off switching built into the control knob.

    Designed for residential installation where two separate circuits need dimming control from a single faceplate, the dimmer switches between Trailing-edge mode (pre-set, suits most LED and electronic transformers) and Leading-edge mode (suits resistive loads and magnetic transformers) via the front control knob. Trimming adjustments, mode switching and factory reset are all accessible from the front plate without removing the dimmer from the wall, which simplifies commissioning and troubleshooting on site.

    The flat plate construction projects just 2.5mm from the wall once fitted to a 25mm minimum back box, giving a lower profile than standard screw-fixed faceplates. The gunmetal finish is a dark grey with subtle metallic sheen that pairs well with contemporary interiors, industrial schemes and monochrome colour palettes. The dimmer includes overload and overheat protection, plus an integrated Inrush Current Limiter (ICL) to manage high inrush current when LED loads are first switched on.

    The dimmer is not recommended for mixed-load installations where different lamp brands, wattage ratings or lamp types are combined on a single gang. For best performance, each gang should control identical lamps of the same wattage from the same manufacturer.

    Specification
    Height 87.5 mm
    Width 87.5 mm
    Projection 2.5 mm
    Min. Mounting Box Depth 25mm
    Construction Premium grade steel
    Finish Gunmetal
    Class I
    IP Rating IP20
    Primary Voltage 230V 50Hz
    Earth Terminal Yes
    Terminal Screw
    Warranty 2
    Downloads

    Product Specification Sheet

    Frequently Asked

    What's the difference between Trailing-edge and Leading-edge mode?

    Trailing-edge mode (pre-set on this dimmer) suits most LED lamps and electronic transformers by cutting the trailing edge of the AC waveform. Leading-edge mode suits resistive loads like incandescent bulbs and magnetic transformers by cutting the leading edge. The mode can be switched via the front control knob without removing the dimmer from the wall.

    Can I mix LED and halogen bulbs on one gang?

    No. Knightsbridge recommends against mixing lamp types, brands or wattages on a single gang. Each gang should control identical lamps from the same manufacturer for reliable dimming performance and to avoid flicker or incompatibility.

    What back box depth is required?

    A 25mm minimum back box depth is needed for safe installation. The flat plate adds 2.5mm of projection from the wall once fitted, giving a total of approximately 27.5mm from the wall surface to the front of the faceplate.

    How is the minimum brightness adjusted?

    The dimmer has a trim adjustment accessible via the front control knob. This allows the minimum brightness level to be set during installation to prevent the lamps cutting out at the lower end of the dimming range or flickering when dimmed low.

    Shipping & Returns

    Delivery UK delivery is £14.99, and delivery is free on all orders of £99 or more, in the UK and internationally.

    Returns If you change your mind, you have 14 days from delivery to tell us, and a further 14 days to send the goods back. Return postage for a change-of-mind return is paid by you. Change-of-mind returns are subject to an inspection and handling deduction. See our full returns policy.

    To arrange a return, call us on 020 8149 5199 or use our contact page.