Description
A single coaxial connection on a screwless flat plate, finished in Ice White. The front cover clips into place, so nothing breaks up the face of the plate and you get a clean 88mm square with the aerial connector set in the middle. The white is bright and slightly warm rather than stark, and the profile is shallow, which is what makes screwless plates so easy to live with in a room full of them.
This is the plate we reach for when a television point needs to disappear into the wall behind a set, and it works equally well in a bedroom, a study or a hallway where an aerial run ends. It handles the aerial and data side of things on a low voltage circuit rather than mains, so it sits comfortably alongside a power point on the same stretch of wall. We would choose it for anyone gradually bringing a room's plates over to the same screwless style, particularly where older ivory or bevelled plates are coming out and the aerial position needs to match everything else. It is for indoor rooms only.
The plate and cover are moulded polycarbonate, a hard-wearing plastic that takes a smooth, even white and shrugs off knocks in a busy hallway. Keeping it looking new asks very little: a dry cloth over the surface now and then, and a cloth wrung out in warm water for finger marks, leaving polishes, solvents and abrasive creams well away from the moulding. It carries a ten year warranty. Lined up with other screwless plates along the same wall it reads as part of the room rather than an addition, and Ice White is the finish we stock it in, which keeps it neutral against paint, paper and panelling alike.
Specification
| Colour |
Ice White |
| Type of Finish |
Core |
| Weight |
0.07KG |
| Length |
88mm |
| Width |
25mm |
| Height |
88mm |
| Back Box Depth |
25mm |
| Materials Used |
Polycarbonate, Metal |
| Protection Class |
Class 3 - Low Voltage |
| IP Rating |
IP20 |
| Warranty |
10yrs |
| UKCA/CE |
Yes |
| Additional Certification |
BS EN 60669 |
| Number of Gangs |
1 |
| Pieces Included |
1 |
| Installation |
Requires Installation By Qualified Electrician. 25mm Box Depth Is Recommended. |
| Suitable For |
Indoor Use Only. Data circuits. |
| Country of Origin |
China |
Frequently Asked
What size is the plate?
It is a square plate, 88mm by 88mm, with a depth of 25mm.
What is it made from?
The plate and clip-on cover are moulded polycarbonate in an Ice White finish, weighing around 65g.
Does it carry mains power?
No. It is a Class 3 low voltage fitting for aerial and data circuits, not a power point.
Can I use it in a bathroom or outdoors?
No, it is intended for indoor use only in dry rooms.
How should I clean it?
Dust it with a dry cloth, and lift finger marks with a cloth wrung out in warm water. Avoid solvents, polishes and abrasive creams, which will dull the plastic.
Is there a warranty?
Yes, it carries a ten year warranty.