Description
A single telephone point on a screwless flat plate, finished in solid orange across the whole face. The plate is 88mm square, so it keeps to the footprint of an ordinary single plate, and the front is smooth with no screw heads to break it up. The moulding is plain: crisp edges, a shallow profile and one outlet set in the centre. It is intended for low voltage telephone and data circuits in dry indoor rooms.
Orange earns its keep where circuits need telling apart at a glance. We reach for this one in home offices, studios, workshops and small comms cupboards, wherever a telephone line runs near power and must never be mistaken for it. It suits anyone who looks after their own wiring and would rather read a wall than trace a cable: landlords, small studios, and people running a phone line down to a desk at the far end of the house. In a hallway the colour is bold, so most people keep it to the rooms where it is doing a job.
The plate is moulded in ABS, a tough plastic that takes colour well and holds its finish in a room that sees daily use. Cleaning asks very little: a dry cloth for dust, and for marks a cloth wrung out in warm water, then wiped dry. Keep solvents, kitchen sprays and abrasive creams off the face, since they dull the sheen of moulded plastic. It carries a ten year warranty. Set against plain white plates for power, it makes the telephone line obvious without a single label.
Specification
| Colour |
Orange |
| Type of Finish |
Colour |
| Weight |
0.07KG |
| Length |
88mm |
| Width |
35mm |
| Height |
88mm |
| Back Box Depth |
35mm |
| Materials Used |
Polycarbonate, Metal |
| Protection Class |
Class 3 - Low Voltage |
| IP Rating |
IP20 |
| Warranty |
10yrs |
| UKCA/CE |
Yes |
| Additional Certification |
BS EN 60669 |
| Number of Gangs |
1 |
| Pieces Included |
1 |
| Installation |
Requires Installation By Qualified Electrician. 35mm Box Depth Is Recommended. |
| Suitable For |
Indoor Use Only. Data circuits. |
| Country of Origin |
China |
Frequently Asked
How big is the plate?
It is 88mm square, the usual single plate size, with a body depth of 35mm behind the face.
What is it made from?
The plate is moulded ABS in an orange finish, with a screwless front so no fixing heads show on the face.
Can it go in a bathroom or outside?
No. It is rated IP20 and intended for indoor use in dry rooms only.
Is it only for a telephone line?
It is made for telephone and data circuits, working at low voltage as Class 3 equipment.
How should I clean it?
Dust it with a dry cloth. For fingermarks, use a cloth wrung out in warm water and dry the plate afterwards, avoiding solvents and abrasive cleaners.
Does it come with a warranty?
Yes, it carries a ten year warranty from the maker.