Description
A single telephone point behind a screwless faceplate, finished in ice white. The front is flat and unbroken, with no screw heads sitting across it, and that is why we reach for screwless plates in rooms where the walls are pale and every small detail shows. At 88mm square it keeps to the familiar single plate footprint, so it lines up neatly with other accessories along the same wall. It is a quiet piece of hardware, and that is rather the point of it.
It suits a home office desk position, a hallway where a handset lives, or a bedside corner, and it is just as useful low down behind furniture where the cable can run out of sight. This is for indoor rooms and for low voltage data circuits rather than anything on the mains. We would specify it alongside matching screwless power points so a run of accessories reads as one set rather than a mix of plate styles. If you are re-plating a room after decorating, it is an inexpensive part of making the walls look properly finished.
The plate is moulded in polycarbonate, a hard-wearing plastic that holds its colour and shrugs off the odd knock from a vacuum cleaner or a chair back. Keep it clean with a dry cloth, or a barely damp one for marks; household sprays, spirits and cream cleaners are the things to keep away from it, since they can dull the surface. It carries a ten year warranty. In a pale room it more or less disappears, which is usually what you want from a telephone point, while against a deeper wall colour it reads as a crisp white square, so it is worth holding one up to the paint before you commit to a whole run.
Specification
| Colour |
Ice White |
| Type of Finish |
Core |
| Weight |
0.07KG |
| Length |
88mm |
| Width |
35mm |
| Height |
88mm |
| Back Box Depth |
35mm |
| Materials Used |
Polycarbonate, Metal |
| Protection Class |
Class 3 - Low Voltage |
| IP Rating |
IP20 |
| Warranty |
10yrs |
| UKCA/CE |
Yes |
| Additional Certification |
BS EN 60669 |
| Number of Gangs |
1 |
| Pieces Included |
1 |
| Installation |
Requires Installation By Qualified Electrician. 35mm Box Depth Is Recommended. |
| Suitable For |
Indoor Use Only. Data circuits. |
| Country of Origin |
China |
Frequently Asked
What size is the faceplate?
It measures 88mm high by 88mm wide, with a depth of 35mm behind the plate.
Does the plate have visible screws?
No. It is a screwless plate, so the front face stays flat and clear.
What is the plate made from?
Moulded polycarbonate in an ice white finish.
Can it be used in a bathroom or outdoors?
No. It is rated IP20 and intended for dry indoor rooms only.
Is this a mains fitting?
It is not. It is Class 3, low voltage, and intended for telephone and data circuits.
How long is the warranty?
Ten years.