Description
Copper brings a bit of warmth to a wall where chrome would only bring shine, and this is a small dose of it. It is a single gang telephone point on a square plate of 88mm, with a screwless outer plate that leaves the face reading as one clean piece. The moulded body carries the copper finish across the whole plate, with the module set neatly in the centre. It works on low voltage data circuits rather than mains power, so it sits in the quieter part of a wall's hardware.
We reach for points like this in a home office, a hallway or a bedroom, wherever a handset or a router needs a line brought to the wall rather than trailed across the floor. It suits anyone running copper plates through a room, since a telephone point left in white plastic tends to be the one thing that gives the game away. Dry indoor rooms are where it belongs: a study wall or a landing is fine, a bathroom or an unheated outbuilding is not.
The plate is moulded polycarbonate with a copper finish, which keeps the weight low and the edges crisp. Keep it clean with a soft, dry cloth and nothing more, as polishes, creams and solvents will dull the finish far faster than fingerprints ever will. It carries a ten year warranty. Grouped with copper sockets and switches along the same wall, it reads as part of the scheme rather than an afterthought, and it is the sort of small piece worth changing at the same time as everything else rather than a year later.
Specification
| Colour |
Copper |
| Type of Finish |
Metallic |
| Weight |
0.07KG |
| Length |
88mm |
| Width |
35mm |
| Height |
88mm |
| Back Box Depth |
35mm |
| Materials Used |
Polycarbonate, Metal |
| Protection Class |
Class 3 - Low Voltage |
| IP Rating |
IP20 |
| Warranty |
10yrs |
| UKCA/CE |
Yes |
| Additional Certification |
BS EN 60669 |
| Number of Gangs |
1 |
| Pieces Included |
1 |
| Installation |
Requires Installation By Qualified Electrician. 35mm Box Depth Is Recommended. |
| Suitable For |
Indoor Use Only. Data circuits. |
| Country of Origin |
China |
Frequently Asked
What size is the plate?
It is a square single gang plate, 88mm by 88mm, with a body depth of 35mm behind the face.
What is the plate made from?
Moulded polycarbonate with a copper finish, which is why it weighs only 0.065kg.
Is this for mains power?
No. It is a Class 3 low voltage fitting for data circuits, intended for a telephone line rather than a power point.
How should I clean the copper finish?
A soft, dry cloth is all it needs. Avoid metal polish, cream cleaners and solvents, as these can mark or dull the finish permanently.
Can it be used in a bathroom or outdoors?
No. It is rated IP20 and made for indoor use in dry rooms only.
Is there a warranty?
Yes, it carries a ten year warranty.