Free Delivery on all orders over £99*

Zon 60.6cm Round Recessed Downlight Mounting Ring - White

£8499
The RRP is the manufacturer's recommended retail price of the item.
Limited Stock
We are an Independent UK Company
Price match. Found it cheaper? Contact us
Trade Discount Available
Description

The Zon is a 60.6cm diameter mounting ring designed to support large round recessed downlights within ceiling voids. Constructed from white-finished metal, the ring provides a structural frame that bridges the gap between the ceiling cut-out and the downlight housing, distributing the weight of the fitting across the ceiling joists or plasterboard edge.

Designed for residential and commercial installation where large-diameter recessed downlights are specified, the Zon suits ceiling heights of 2.4m or above where a flush-mounted light source is needed without visible suspension. The 60.6cm aperture accommodates downlights in the 550-600mm diameter range, commonly used for high-output LED panels in lobbies, open-plan living areas, commercial offices and retail spaces. The ring sits between the ceiling surface and the downlight trim, concealing the cut edge and providing a clean finished appearance once the downlight is installed.

The white powder-coated metal finish matches standard white ceilings and downlight trims, maintaining a seamless ceiling plane. The 67.2cm outer diameter provides a mounting flange wide enough to span typical joist centres (400-600mm), and the 6.4cm height gives clearance for most LED driver units and wiring within the ceiling void. The IP20 rating confirms suitability for dry internal environments only — this is not a bathroom or outdoor-rated component.

Specification
Height 6.4cm
Length 67.2cm
Diameter 60.6cm
Finish White
Construction Metal
IP Rating IP20
Dimmable No
Warranty 2
Frequently Asked

What downlight sizes does this ring accommodate?

The 60.6cm aperture suits round recessed downlights with trim diameters between 550mm and 600mm. Check the downlight manufacturer's specifications to confirm the required cut-out diameter before ordering the mounting ring.

What ceiling void depth is needed?

The ring itself adds 6.4cm of height within the void. The total clearance needed depends on the specific downlight housing and driver unit being installed — most large recessed LED panels require 80-120mm of ceiling void depth including the mounting ring.

Can this be used in bathrooms?

No. The IP20 rating confirms this mounting ring is only suitable for dry internal environments. For bathroom or outdoor installation, a higher IP-rated mounting system is required.

How is the ring fixed to the ceiling structure?

The 67.2cm outer diameter provides a mounting flange that sits on top of the ceiling surface or spans between ceiling joists. Fixings depend on the ceiling construction — plasterboard installations typically use toggle fixings or batten supports, while concrete or solid ceilings may require direct screws or anchors. Installation should be carried out by a qualified electrician.

Shipping & Returns

Delivery UK delivery is £14.99, and delivery is free on all orders of £99 or more, in the UK and internationally.

Returns If you change your mind, you have 14 days from delivery to tell us, and a further 14 days to send the goods back. Return postage for a change-of-mind return is paid by you. Change-of-mind returns are subject to an inspection and handling deduction. See our full returns policy.

To arrange a return, call us on 020 8149 5199 or use our contact page.

See it lit, in person

Lighting looks different in a real room. Come and see our range at our showrooms in Birmingham, Hong Kong and Dubai, or talk to our design team wherever you are.

Niori lighting showroom trailer video with closeups of alabaster lighting

Why Niori

Over 20 years lighting homes worldwide

We are a specialist lighting and mirror retailer with showrooms in Birmingham, Hong Kong and Dubai, shipping to customers around the world. Our own design team is here to help, from first idea to final fitting.

Genuine products

An authorised stockist

Every product arrives brand new with the full manufacturer warranty. Found it cheaper elsewhere? Ask us about a price match.

Ordering with us

Free delivery over £99

Free delivery on orders over £99, in the UK and worldwide. Easy returns within 14 days, subject to our returns policy. Full manufacturer warranty included.

Design help

Not sure what you need?

Our design team can help you plan your lighting, share photos and videos of stock, and send samples worldwide. Book a showroom visit in Birmingham, Hong Kong or Dubai, or ask about our lighting design service.

You Might Also Like

Recommended For You

    Our Reviews

    From first click to final installation, our customers share how Niori lights up their spaces. Read their words and envision what’s possible for yours.

    Featured Projects

    Step into our portfolio and see how we transform homes, restaurants, and commercial spaces and more, worldwide. Click here for a closer look at our latest projects.

    Description

    The Zon is a 60.6cm diameter mounting ring designed to support large round recessed downlights within ceiling voids. Constructed from white-finished metal, the ring provides a structural frame that bridges the gap between the ceiling cut-out and the downlight housing, distributing the weight of the fitting across the ceiling joists or plasterboard edge.

    Designed for residential and commercial installation where large-diameter recessed downlights are specified, the Zon suits ceiling heights of 2.4m or above where a flush-mounted light source is needed without visible suspension. The 60.6cm aperture accommodates downlights in the 550-600mm diameter range, commonly used for high-output LED panels in lobbies, open-plan living areas, commercial offices and retail spaces. The ring sits between the ceiling surface and the downlight trim, concealing the cut edge and providing a clean finished appearance once the downlight is installed.

    The white powder-coated metal finish matches standard white ceilings and downlight trims, maintaining a seamless ceiling plane. The 67.2cm outer diameter provides a mounting flange wide enough to span typical joist centres (400-600mm), and the 6.4cm height gives clearance for most LED driver units and wiring within the ceiling void. The IP20 rating confirms suitability for dry internal environments only — this is not a bathroom or outdoor-rated component.

    Specification
    Height 6.4cm
    Length 67.2cm
    Diameter 60.6cm
    Finish White
    Construction Metal
    IP Rating IP20
    Dimmable No
    Warranty 2
    Frequently Asked

    What downlight sizes does this ring accommodate?

    The 60.6cm aperture suits round recessed downlights with trim diameters between 550mm and 600mm. Check the downlight manufacturer's specifications to confirm the required cut-out diameter before ordering the mounting ring.

    What ceiling void depth is needed?

    The ring itself adds 6.4cm of height within the void. The total clearance needed depends on the specific downlight housing and driver unit being installed — most large recessed LED panels require 80-120mm of ceiling void depth including the mounting ring.

    Can this be used in bathrooms?

    No. The IP20 rating confirms this mounting ring is only suitable for dry internal environments. For bathroom or outdoor installation, a higher IP-rated mounting system is required.

    How is the ring fixed to the ceiling structure?

    The 67.2cm outer diameter provides a mounting flange that sits on top of the ceiling surface or spans between ceiling joists. Fixings depend on the ceiling construction — plasterboard installations typically use toggle fixings or batten supports, while concrete or solid ceilings may require direct screws or anchors. Installation should be carried out by a qualified electrician.

    Shipping & Returns

    Delivery UK delivery is £14.99, and delivery is free on all orders of £99 or more, in the UK and internationally.

    Returns If you change your mind, you have 14 days from delivery to tell us, and a further 14 days to send the goods back. Return postage for a change-of-mind return is paid by you. Change-of-mind returns are subject to an inspection and handling deduction. See our full returns policy.

    To arrange a return, call us on 020 8149 5199 or use our contact page.