Zepo C/M T02/S 10W G4 Ceiling Spotlight - Chrome Matte

The Zepo C/M T02/S is a compact ceiling fitting built around a single G4 capsule, drawing a maximum of 10W. It runs on 12V (AC or DC), so it pairs with a low-voltage supply rather than connecting straight to mains. At a square 130 by 130 mm and only 40 mm deep, it sits close to the surface and casts a focused pool of light from its central lamp position. As a low-voltage spot, it is the kind of fitting US buyers would file under a flush mount ceiling light, scaled down to a single accent point.

The small footprint and shallow depth make the Zepo a practical choice for tighter ceilings such as a hallway, a landing, a small cloakroom or alongside others as part of a wider scheme. Because it carries one G4 lamp, light output stays modest and directional, so it works best as an accent or supplementary point rather than the sole source for a large room. In a bigger space, several units spaced across the ceiling give more even coverage. The 12V supply also suits lower ceilings where a slim, close-mounted profile is wanted.

The body is steel finished in chrome matte, giving a soft metallic look that avoids high-gloss glare. It is rated IP20, which means it is intended for dry indoor rooms only and should be kept clear of bathrooms, porches and any damp or outdoor position. The fitting is ceiling mounted and takes a replaceable G4 lamp, so the light source can be swapped as needed. At just 128 g it is light to handle during installation. This model is part of the wider Zepo range at Niori.

What size room does this suit?

With a single G4 lamp at up to 10W, the Zepo gives a focused, modest output rather than broad room lighting. It works best as an accent or supplementary point in compact spaces such as a hallway or cloakroom, or grouped across a larger ceiling for more even coverage.

Can it be used in a bathroom or outdoors?

No. The fitting is rated IP20, so it is for dry indoor use only. Keep it out of bathrooms, porches, carports and any damp or outdoor location, where a higher IP rating would be required.

Does it need a transformer?

Yes. It runs on 12V, accepting either AC or DC, so it needs a suitable low-voltage supply rather than a direct mains connection. Match the supply to the fitting's maximum 10W draw alongside any other lamps on the same circuit.

How do I clean it?

Wipe the chrome matte steel body with a soft, dry or slightly damp cloth once the fitting is switched off and cool. Avoid abrasive pads and harsh chemicals, which can mark the matte finish, and do not let moisture reach the lamp or contacts.