Description
The Zepo C/M T02 is a compact ceiling light that takes a single G4 capsule rated at up to 10W. It runs on a low-voltage 12V supply (either AC or DC), so it pairs with a suitable transformer rather than connecting straight to mains. At 130 by 130mm and only 40mm deep, it is a small flush mount LED ceiling light that sits close to the surface and adds a focused point of light rather than broad room illumination.
The modest output and tight form make this a fitting for accent and detail lighting rather than a primary source for a large room. It suits hallways, alcoves, landings and small utility spaces where a neat, low-profile fixture is wanted, and it works well in groups where several units share the lighting of an area between them. As an IP20 fitting it is for dry indoor positions only, so keep it clear of bathrooms, porches and any damp or exposed locations. Because it is low voltage, its placement is governed by the reach of the 12V supply feeding it.
Construction is steel finished in matte chrome, giving a clean, understated face that reads as modern without drawing attention to itself. The shallow 40mm depth keeps the body close to the ceiling once mounted, and at 128g it is light to handle during fitting. The G4 capsule is replaceable, so the light source can be swapped without changing the fixture, and the 12V AC/DC input allows it to be wired into an existing low-voltage arrangement. The Zepo range carries matching ceiling fittings for a consistent look across a space.
Specification
| Power |
max 10W |
| Voltage |
12 AC; 12 DC |
| IP rating |
IP20 |
| Mounting |
Ceiling Mounted |
| Cap / base |
G4 |
| Shape |
Other |
| Dimensions |
130 × 130 × 40 mm |
| Weight |
128 g |
| Material |
Steel |
| Finish |
Chrome Matte |
Downloads
Frequently Asked
Does this fitting need a transformer?
Yes. It runs on a low-voltage 12V supply, accepting either 12V AC or 12V DC, so it needs a suitable transformer or driver rather than a direct mains connection. Match the transformer rating to the total load of the fittings you are running from it.
What size room does it suit?
With a single G4 capsule at up to 10W, this is an accent fitting rather than a main room light. It is best used for detail lighting in hallways, alcoves and small spaces, or in multiples so several units share the illumination of a larger area.
Can it be used in a bathroom or outdoors?
No. It carries an IP20 rating, which means it is suitable for dry indoor use only. Keep it out of bathrooms, porches and any damp or exposed positions where moisture could reach it.
How do I clean it?
Switch off the supply and let the fitting cool before cleaning. Wipe the matte chrome steel body with a soft dry or slightly damp cloth, avoiding abrasive cleaners that could mark the finish.