Description
The Zaria II is a 213cm-wide suspension light from Schuller carrying 29 amber acrylic diffusers arranged in a cascading arc along a gold-finished metal frame. Each diffuser houses an integrated LED module, totalling 105W of 3000K warm-white light output across the entire fitting. The structure sweeps in a curved line from a single ceiling rose, suspended on adjustable cables that allow height and angle adjustment during installation.
Designed for large-volume spaces where a single centrepiece fitting is needed in place of multiple smaller pendants, the Zaria II suits dining areas longer than 2.5m, hotel lobbies, entrance halls, and commercial hospitality settings with ceiling heights above 3m. The included TRIAC-compatible dimming driver allows light levels to be adjusted from full output down to around 10%, controlled via a standard trailing-edge wall dimmer. At 213cm wide and 138cm tall when fully extended, the fitting requires adequate clearance below and above to accommodate the arc without the diffusers encroaching on circulation space.
The gold finish on the metal frame reads as a warm metallic tone rather than a high-polish mirror surface, pairing with brass, bronze and warm-toned timber interiors without clashing with cooler finishes nearby. The amber acrylic diffusers scatter the light softly rather than projecting hard-edged beams, creating a diffuse glow across the room rather than concentrated downlighting. At 23.96kg, the fitting needs secure ceiling fixing into a joist, RSJ or suitable structural anchor point — a standard plasterboard fixing will not support the weight.
The 29 individual LED modules are factory-sealed inside the diffusers and are not user-replaceable. The fitting carries a CRI of >88, meaning colours render accurately under the light rather than shifting tone. The 3000K colour temperature produces warm white light comparable to a halogen bulb, warmer than typical office LED (4000K) and cooler than an incandescent filament bulb (2700K).
Specification
| Width |
213cm |
| Height |
138cm |
| Depth |
32cm |
| Weight |
23.96kg |
| Energy Class |
G |
| Electric Class |
Class 1 |
| Power |
105W |
| Voltage |
220/240V |
| Frequency |
50/60Hz |
| Lumen |
8.21lm |
| Colour Temperature |
3000K |
| CRI |
>88 |
| Finish |
Gold, Amber |
Downloads
Product Specification Sheet
Assembly Instruction
Frequently Asked
Is the Zaria II dimmable?
Yes. The fitting includes a TRIAC-compatible dimming driver that works with standard trailing-edge wall dimmers. Light output can be adjusted from full brightness down to around 10%. The dimming set is included with the fitting.
What ceiling height is needed?
The fitting is 138cm tall when fully extended and 213cm wide. It needs a ceiling height of at least 3m to avoid the lower diffusers hanging below a comfortable circulation height. The suspension cables are adjustable during installation to suit the room.
Can the LED modules be replaced?
No. The 29 LED modules are factory-sealed inside the amber acrylic diffusers and are not user-replaceable. The LEDs are rated for long operational life, but if a module fails the diffuser assembly will need to be replaced as a complete unit.
What ceiling fixing is required?
At 23.96kg, the Zaria II must be fixed into a ceiling joist, RSJ or suitable structural anchor point rated to carry at least 30kg. Standard plasterboard cavity fixings will not support the weight. Professional installation is recommended.