Wisteria 1 Light Crystal Pendant Light 15cm - Polished Nickel

The Wisteria is a 15cm diameter crystal pendant light with five curved polished nickel arms suspending strands of precision-cut clear crystal buttons in a cascading formation. A single E14 bulb fitting sits at the centre of the frame, casting light through the crystal strands to create reflections and scatter patterns on surrounding surfaces.

Designed for spaces where a compact decorative pendant is needed without overwhelming the room, the Wisteria suits hallways, cloakrooms, small dining alcoves, bedside positions and bathroom vanity areas. The 425mm minimum drop works in standard 2.4m ceiling heights, while the maximum 1425mm drop allows the pendant to be set lower over a breakfast bar or console table in rooms with higher ceilings. The polished nickel finish pairs cleanly with chrome taps, handles and other metal fixtures in contemporary and transitional interiors.

Each crystal button is individually strung, so the strands move slightly when air circulates in the room, catching and redirecting light as they shift. The frame structure uses five curved arms radiating from a central hub, with each arm carrying between three and five strands of varying lengths to build the cascading silhouette. At 1.5kg the pendant has enough weight to hang steadily on the cable without swaying excessively, while remaining light enough for standard ceiling rose fixings.

What bulb does it take?

The Wisteria uses a single E14 small Edison screw bulb up to 20W maximum. Bulbs are sold separately. Most users pair this with a 4-6W LED candle or golf ball bulb in warm white (2700K-3000K) to light the crystal without glare.

Is it dimmable?

Yes, provided you fit a dimmable E14 bulb and pair it with a compatible dimmer switch on the circuit. The pendant frame itself has no electronic components — dimming capability depends entirely on the bulb and dimmer used.

Can the drop height be adjusted?

The cable is adjustable between 425mm and 1425mm during installation. Once the pendant is hung at the desired height, the excess cable is concealed in the ceiling canopy. Changing the drop height after installation requires re-opening the canopy and re-adjusting the cable.

How is the crystal cleaned?

Switch off the power and allow the bulb to cool completely. Wipe each crystal button gently with a dry microfibre cloth to remove dust. For heavier build-up, a barely-damp cloth with distilled water is acceptable, followed by immediate drying with a clean dry cloth. Do not use glass cleaners or spray polishes — residue can dull the crystal finish.