Description
An oval head on a flexible arm, finished in satin nickel, with a toggle switch on the base so the light is controlled where you reach for it. The LED is built in and draws 3W, giving a warm white 3000K output that sits close to a traditional filament in tone. The arm bends and holds, so the head can be aimed down onto a book or turned back towards the wall for a softer wash. Projection is 390mm at full extension, and the head itself is slim rather than bulky.
We reach for this one at bedsides, where a pair either side gives each person their own light without a lamp taking up the top of a cabinet. It also earns its place beside a reading chair, in a small study over a desk, or in a dressing area where you want light on your face rather than the back of your head. Output is fixed rather than dimmable, so treat it as task light with the on-off switch doing the work. It suits dry rooms indoors: bedrooms, landings, studies and box rooms.
The satin sheen is kept even across head, arm and base, so nothing on it flashes back at you when the light is on. Cleaning: keep it dry, dust the head and along the arm with a soft cloth, and leave polishes and solvents alone, as they will dull the finish over time. It carries a three year warranty. We stock the oval head in polished chrome and antique brass too, and there is a cylinder head version in the same finishes, which helps if you are mixing shapes in one room.
Specification
| Colour |
Satin Nickel |
| Ceiling Mountable |
Yes |
| Weight |
0.45KG |
| Width |
62mm |
| Height |
145mm |
| Projection |
390mm |
| Materials Used |
Aluminium, Iron |
| Energy Class |
F |
| Max Energy Class |
F |
| Min Energy Class |
F |
| Lamp |
1 x 3W integrated LED (no lamps to fit) |
| Lamp Cap |
Integral LED |
| Recommended Lamp |
Integral LED |
| Colour Temperature |
3000K Warm White (±5%) |
| System Flux |
270lm (±5%) |
| Light Distribution |
Down |
| Protection Class |
Class 1 - Earth Connection Required |
| Total Power Consumption |
3W (±5%) |
| Input Voltage |
100-240V~50/60Hz |
| Switch |
Yes - Toggle Switch |
| Dimmable |
No |
| IP Rating |
IP20 |
| Average Life |
25000hrs |
| Warranty |
3yrs |
| UKCA/CE |
Yes |
| Pieces Included |
1 |
| Installation |
Requires Installation By Qualified Electrician |
| Product Care |
(1) Wipe clean with a dry cloth, do not use any cleaning detergents, do not use rough or coarse material to clean. (2) Ensure light is not illuminated when cleaning. |
| Country of Origin |
China |
Frequently Asked
Can I change the bulb?
No. The LED is integrated into the head, so there is no lamp to fit or replace. It is rated at 3W with an average life of 25,000 hours.
How far does it stick out from the wall?
Projection is 390mm with the arm extended, and the head measures 62mm across with an overall height of 145mm. The flexible arm lets you pull it in closer or push it out as needed.
Is it dimmable?
No, it is not dimmable, and it should not be wired to a dimmer. Control is by the toggle switch on the base.
What is the light like?
Warm white at 3000K, with 270 lumens through a narrow 45 degree beam, so it reads as a focused pool of light rather than general room lighting.
Is it suitable for a bathroom?
No. It is rated IP20, which means dry interiors only, away from splashes and steam.
How should I look after the finish?
Wipe with a dry, lint-free cloth when it needs it, avoiding sprays, creams and abrasives so the satin nickel keeps its even sheen.