Description
A slim cylinder head sits at the end of a flexible arm, so the beam goes where you point it and stays put. The arm gives about 350mm of reach from the wall, and a toggle switch on the base turns the light on and off without involving the room's main circuit. Its LED is built in, draws 3W and gives a warm white light with a soft edge to it. This is a small, close-quarters fitting rather than one asked to light a whole room.
We fit these in pairs beside a bed, where there is no surface for table lamps and no wish for a trailing flex to a socket. They also work over a reading chair, at a desk in a spare room, or in a narrow hall where a bracket needs to keep tight to the wall. The switch on the base suits anyone who prefers to reach up and click rather than cross the room. It is not dimmable, so where a very low late-night level matters we would let a bedside lamp elsewhere carry that job.
The finish is antique brass, a mellow gold with the shine knocked back, and it sits happily against painted walls, wood and older brass ironmongery. The fitting is double insulated, and it is rated for dry indoor rooms, so keep it out of bathroom zones and away from anything that steams. Antique brass shows marks less than a bright plate does; a dry lint-free cloth now and then is all it asks, with the power off and the head cool. It carries a three year warranty. The same fitting is stocked in polished chrome and satin nickel, and we also hold an oval head version in the same finishes if you prefer a softer profile.
Specification
| Colour |
Antique Brass |
| Ceiling Mountable |
Yes |
| Weight |
0.46KG |
| Width |
62mm |
| Height |
145mm |
| Projection |
350mm |
| Materials Used |
Aluminium, Iron |
| Energy Class |
F |
| Max Energy Class |
F |
| Min Energy Class |
F |
| Lamp |
1 x 3W integrated LED (no lamps to fit) |
| Lamp Cap |
Integral LED |
| Recommended Lamp |
Integral LED |
| Colour Temperature |
3000K Warm White (±5%) |
| System Flux |
270lm (±5%) |
| Light Distribution |
Down |
| Protection Class |
Class 2 - Double Insulated |
| Total Power Consumption |
3W (±5%) |
| Input Voltage |
100-240V~50/60Hz |
| Switch |
Yes - Toggle Switch |
| Dimmable |
No |
| IP Rating |
IP20 |
| Average Life |
25000hrs |
| Warranty |
3yrs |
| UKCA/CE |
Yes |
| Pieces Included |
1 |
| Installation |
Requires Installation By Qualified Electrician |
| Product Care |
(1) Wipe clean with a dry cloth, do not use any cleaning detergents, do not use rough or coarse material to clean. (2) Ensure light is not illuminated when cleaning. |
| Country of Origin |
China |
Frequently Asked
Can the LED be changed?
No. The LED is integrated into the cylinder head rather than sitting in a socket, so there is no lamp to buy or swap. It is rated at an average life of 25,000 hours.
How much light does it give, and what colour?
270 lumens at 3000K warm white, from a 3W integrated LED, with a 45 degree beam that keeps the light fairly contained on a page or a work surface.
How far does it project from the wall?
The arm reaches 350mm at full extension, with a head width of 62mm and a height of 145mm. Because the arm flexes, you can pull the head in closer or angle it down as needed.
Is it dimmable?
No, it is non-dimmable. Control is by the toggle switch on the base, so it should not be wired to a dimmer.
Can it be used in a bathroom?
It is IP20, which means dry indoor rooms only. Bedrooms, studies, halls and living rooms are its territory rather than bathrooms or anywhere exposed to damp.
How should the antique brass be cleaned?
Switch it off first and let the head lose its heat, then use a dry lint-free cloth. Avoid metal polishes, creams and household sprays, which can lift an antiqued finish.