Description
The Vosmarne is a set of three round recessed downlights in satin nickel, each with a brushed steel bezel and a clear glass cover over the lamp. Each light is 8.5cm across and needs a 6.8cm cut-out with 7cm of depth in the ceiling void, so only a slim ring of metal shows once it is fitted. Each one takes a GU10 lamp, given at 4W, 400 lumens per light and a warm 2700K. The set carries both IP20 and IP44 ratings, and the bezel itself is marked IP44, so the face is protected from splashing water.
A set of three suits a hallway, a kitchen or a living room where you want even light spread across the ceiling rather than a single central pendant. The warm 2700K glow sits comfortably alongside table lamps in the evening, and matching downlights spaced in a line give a tidy, uncluttered ceiling. With the IP44 face, we would also suggest them for a bathroom, where a qualified electrician will confirm the right zone. Satin nickel is a soft, brushed silver that pairs well with chrome taps, stainless steel appliances and grey or white walls.
The body is steel and the lamp sits behind a clear glass cover, and spring clips on each light hold it up against the ceiling. There is no switch on the lights themselves; they are switched at the wall, so your existing light switch controls them. They run on mains power at 220-240V and, as a wired-in light, should be installed by a qualified electrician. The installation instructions come as a download, and the packed weight is 0.6KG. Before you order, check that your ceiling void gives at least 7cm of depth for each light.
Specification
| Diameter |
8.5cm |
| Body Material |
Steel |
| Body Colour |
Satin nickel |
| Shade Material |
Glass |
| Shade Colour |
Clear |
| Light Source |
GU10 (bulb included) |
| Wattage |
3 x 4W |
| Lumens |
400lm per light (3 lights) |
| Colour Temperature |
2700K |
| Switch |
None (switched at the wall) |
| IP Rating |
IP20, IP44 |
| Protection Class |
Class II |
| Voltage |
220-240V, 50/60Hz |
| Energy Class |
E |
| Recess Depth |
7cm |
| Cut-Out |
6.8cm |
| Weight (packed) |
0.6KG |
Downloads
Installation Instructions (PDF)
Frequently Asked
Can these downlights go in a bathroom?
The bezel is marked IP44, so the face is protected from splashing water and we suggest them for a bathroom ceiling, where a qualified electrician will confirm the right zone.
What size hole does each downlight need?
Each light needs a 6.8cm cut-out and 7cm of depth in the ceiling void, and the 8.5cm bezel covers the edge of the hole.
Which bulb does it take?
Each downlight takes a GU10 lamp, given at 4W with 400 lumens per light and a warm colour temperature of 2700K.
How is the light switched?
There is no switch on the lights themselves; the set is switched at the wall, so your existing wall switch in the room controls it.
How does the satin nickel finish look?
The steel bezel is satin nickel, a brushed silver finish with a soft sheen, and each light has a clear glass cover over the lamp.
How many downlights are there in the set?
There are three downlights in the set, each 8.5cm across, so you can light a hallway or a kitchen evenly with a matching trio.