Description
The Venus is a 225mm circular LED wall light finished in matt black with an integrated 9W 3000K LED that produces 780 lumens through a 120° beam angle. The light source sits behind a central black disc, casting illumination outward against the wall to create a halo effect around the fitting's perimeter. The 52mm projection keeps the fitting close to the wall surface.
Designed for hallways, corridors, staircases and living room accent walls, the Venus provides ambient wash lighting rather than direct task light. The 3000K colour temperature produces warm white light that softens hard architectural lines and adds depth to flat wall surfaces. The circular form works in both portrait and landscape orientations, and multiples can be installed in vertical or horizontal runs to mark a route or define a feature wall.
The matt black finish absorbs rather than reflects ambient light, giving the fitting a defined silhouette against white or light-coloured walls. At 0.62kg the Venus is light enough to fix directly to plasterboard with appropriate fixings, and the low 9W power draw allows multiple fittings to run on a single lighting circuit without exceeding load limits. The integrated LED is non-dimmable and runs on standard 220-240V mains.
The 3-year warranty covers the integrated LED against early failure. Because the light washes outward rather than pointing at the viewer, the fitting can sit at eye level in a corridor without causing glare for anyone passing. Running several units on one circuit lets you build a rhythm of light along a wall or up a staircase, marking a route while keeping the overall look consistent. The 780 lumen output at 3000K gives enough spread to lift a flat wall without flooding the space, so the effect stays gentle in the evening.
Specification
| Colour Finish 1 |
Black |
| Diameter |
225mm |
| Projection |
52mm |
| Number Of Bulbs |
1 |
| Lamp Socket |
Integrated LED |
| Colour Temperature |
3000K Warm White |
| Beam Angle |
120° |
| Lumen |
780lm |
| Power Consumption |
9W |
| Voltage |
220-240V~50/60Hz |
| Dimmable |
No |
| Weight |
0.62KG |
| Warranty |
3 Year |
Frequently Asked
Is the Venus dimmable?
No. The integrated LED is non-dimmable and runs at a fixed 9W output on 220-240V mains. If dimming is required, consider an alternative fitting with a dimmable LED driver.
What type of light does it produce?
The Venus casts light outward against the wall in a 120° beam, creating a halo effect around the fitting. It provides ambient wash lighting rather than direct downward or task light, suitable for corridors, staircases and accent walls.
Can it be installed on plasterboard walls?
Yes. At 0.62kg the fitting is light enough to fix directly to plasterboard using appropriate cavity fixings rated for the weight. The 52mm projection means the fitting sits close to the wall surface.
How bright is 780 lumens?
780 lumens is approximately equivalent to a traditional 60W incandescent bulb. The 120° beam spreads this output across a wide area, providing gentle ambient light rather than concentrated brightness.