Description
The Valeris is a 100cm linear chandelier built from layered natural Spanish alabaster panels arranged around a brass frame, lit internally by an 80W integrated LED. The alabaster sits in a staggered, two-tier configuration that gives the bar a stepped lower edge and a level upper line. A rounded rectangular brass canopy suspends the fitting on four slender cables, holding the 35cm-wide body level over its full length.
Designed for long dining tables, kitchen islands and rectangular hallways, the Valeris suits rooms with ceiling heights of 2.6m or higher where its horizontal span can read properly. The 14cm body height keeps the fitting compact vertically, so it can be hung 75-85cm above a dining table or island worktop without dominating the sightline across the room. The cable suspension is adjustable on installation to set the final drop.
Each alabaster panel is cut from solid stone, so veining, translucency and mineral density vary between individual panels and between fittings. When the fitting is lit the stone glows from within and the staggered panel layout casts soft vertical shadows along the length of the bar. The brass frame and canopy are finished to a lightly brushed tone that complements the cream and off-white tones of the alabaster.
The 80W LED is built into the fitting rather than supplied as separate lamps, so the Valeris arrives complete and needs no bulbs. Output is even along the full 100cm span, which suits a long table better than a row of individual pendants where the gaps between fittings show.
Specification
| Material |
Brass & Natural Spanish Alabaster |
| Finish |
Soft White & Brass |
| Height |
14cm |
| Length |
100cm |
| Width |
35cm |
| Wattage |
80W LED |
| Warranty |
2 Year |
Frequently Asked
Does the Valeris need bulbs?
No. The 80W LED is integrated into the fitting and is not a replaceable lamp, so no bulbs are required. It arrives ready to wire in.
Is it dimmable?
Dimmer compatibility depends on the dimmer model used with the integrated LED driver. Please contact us before wiring the Valeris into a dimmed circuit so we can confirm suitability for your installation.
What size table or island does it suit?
The 100cm length and 35cm width make the Valeris well-proportioned over dining tables and kitchen islands of around 150-200cm. As a guide, the chandelier should sit at roughly half to two-thirds the length of the table or island beneath it.
What ceiling height is needed?
Ceiling heights of 2.6m or higher allow the fitting to be hung 75-85cm above a dining or island surface, which is the typical range for linear chandeliers of this depth. The cable suspension is adjustable on installation to set the final drop.
Will the alabaster look identical to the photograph?
The overall form, dimensions and finish match the photograph, but each panel is cut from natural Spanish alabaster and shows different veining, tonal variation and translucency. This is a feature of the natural material rather than a defect.