Free Delivery on all orders over £99*

Unity Single Phase Track End Cap - Black Surface Mounted

£499
The RRP is the manufacturer's recommended retail price of the item.
Limited Stock
We are an Independent UK Company
Price match. Found it cheaper? Contact us
Trade Discount Available
Description

The Unity track end cap is a black plastic finishing component measuring 38mm long by 23mm square, designed to close the open ends of Maytoni's Unity single-phase surface-mounted track system. The cap clips onto the track end and covers the internal conductor rail, preventing dust ingress and giving a defined end to the track run.

Used in both residential and commercial track lighting installations, the end cap sits flush with the track profile and is required at every track termination point where a run ends — typically at walls, corners before a connector, or where a track finishes mid-ceiling. The cap holds in place without tools, making it straightforward to fit during installation or to remove for future reconfiguration of the track layout.

The matt black finish matches the Unity track body and other Unity system components, maintaining a consistent appearance across the installation. The injection-moulded plastic construction keeps the weight minimal while providing enough rigidity to remain securely seated once clipped into place.

Specification
Height 2.3cm
Length 3.8cm
Width 2.3cm
Finish Black
Construction Plastic
Warranty 2 Year Guarantee
Downloads

Product Manual

Frequently Asked

Is this compatible with all track lighting systems?

No. The Unity end cap is specific to Maytoni's Unity single-phase surface-mounted track system. It will not fit other manufacturers' tracks or Maytoni's three-phase track variants.

How is the end cap fitted?

The cap clips directly onto the open end of the Unity track without requiring screws or tools. It pushes into place and holds securely once fully seated.

How many end caps are needed per installation?

One end cap is required for every open track termination. A straight run ending at both sides needs two end caps. If the track meets a connector or corner piece, that end does not require a cap.

Shipping & Returns

Free worldwide delivery

Free worldwide delivery on all orders over £99. International orders for third-party brand products may be subject to an additional courier surcharge based on volumetric weight, particularly on larger lighting fixtures — if a surcharge applies, our team will email you with the amount before dispatch and you can proceed or cancel for a full refund. See full delivery terms.

Returns

30-day returns window from delivery. As all our products are electrical or lighting goods, returned items must be inspected and recertified by a qualified electrician before resale — the cost of this inspection (25–40% of the item value) is deducted from your refund. Customers pay return shipping. Made-to-order, special-order and clearance items cannot be returned. See full returns policy.

You Might Also Like

Recommended For You

    Our Reviews

    From first click to final installation, our customers share how Niori lights up their spaces. Read their words and envision what’s possible for yours.

    Featured Projects

    Step into our portfolio and see how we transform homes, restaurants, and commercial spaces and more, worldwide. Click here for a closer look at our latest projects.

    Description

    The Unity track end cap is a black plastic finishing component measuring 38mm long by 23mm square, designed to close the open ends of Maytoni's Unity single-phase surface-mounted track system. The cap clips onto the track end and covers the internal conductor rail, preventing dust ingress and giving a defined end to the track run.

    Used in both residential and commercial track lighting installations, the end cap sits flush with the track profile and is required at every track termination point where a run ends — typically at walls, corners before a connector, or where a track finishes mid-ceiling. The cap holds in place without tools, making it straightforward to fit during installation or to remove for future reconfiguration of the track layout.

    The matt black finish matches the Unity track body and other Unity system components, maintaining a consistent appearance across the installation. The injection-moulded plastic construction keeps the weight minimal while providing enough rigidity to remain securely seated once clipped into place.

    Specification
    Height 2.3cm
    Length 3.8cm
    Width 2.3cm
    Finish Black
    Construction Plastic
    Warranty 2 Year Guarantee
    Downloads

    Product Manual

    Frequently Asked

    Is this compatible with all track lighting systems?

    No. The Unity end cap is specific to Maytoni's Unity single-phase surface-mounted track system. It will not fit other manufacturers' tracks or Maytoni's three-phase track variants.

    How is the end cap fitted?

    The cap clips directly onto the open end of the Unity track without requiring screws or tools. It pushes into place and holds securely once fully seated.

    How many end caps are needed per installation?

    One end cap is required for every open track termination. A straight run ending at both sides needs two end caps. If the track meets a connector or corner piece, that end does not require a cap.

    Shipping & Returns

    Free worldwide delivery

    Free worldwide delivery on all orders over £99. International orders for third-party brand products may be subject to an additional courier surcharge based on volumetric weight, particularly on larger lighting fixtures — if a surcharge applies, our team will email you with the amount before dispatch and you can proceed or cancel for a full refund. See full delivery terms.

    Returns

    30-day returns window from delivery. As all our products are electrical or lighting goods, returned items must be inspected and recertified by a qualified electrician before resale — the cost of this inspection (25–40% of the item value) is deducted from your refund. Customers pay return shipping. Made-to-order, special-order and clearance items cannot be returned. See full returns policy.