Tybia 410x410 38W LED Ceiling Light with PIR Sensor - Black

The Tybia is a square surface-mounted LED ceiling light that puts out 3800 lumens from a 38W integrated array, running at 4000K neutral white for a clean, even spread across the room. A wide 110 degree beam pushes light out to the edges of the space rather than pooling it in the centre, while the built-in PIR sensor switches the fitting on as you walk in and off again once the area clears. American buyers shopping for a flush mount LED ceiling light will recognise the same low-profile format here, sitting close to the ceiling at just 61mm deep. With no replaceable lamp, the LED runs as one sealed unit rated for around 30,000 hours.

The Tybia suits hallways, landings, utility rooms and entrance areas where hands-free switching earns its keep, and the 3800 lumen output covers around 13 m² at general lighting levels, so it works well as the main light for a small to medium room. The PIR makes it a practical choice for stairwells, cloakrooms and walk-through spaces that benefit from automatic on-off rather than a wall switch. Being IP20 rated it is for dry indoor positions only, so keep it clear of bathrooms, porches and any outdoor or damp setting. Its shallow depth helps where ceiling height is tight and a deeper pendant or bulkhead would feel intrusive.

Built from aluminium alloy in a square 410 x 410mm body, the Tybia carries a black finish that reads well against pale or dark ceilings alike. It mounts directly to the ceiling surface and wires into a standard 220-240V AC supply, with the driver housed inside so no separate transformer is needed. The fitting is not dimmable, which is typical for a sensor-led unit where output is meant to be full and immediate on detection. The wider Tybia range includes further sensor and non-sensor ceiling lights if you want to match the look across several rooms.

How big a room will the Tybia light?

At 3800 lumens it covers around 13 m² at general lighting levels, which suits a small to medium hallway, landing or utility room as the main ceiling light. For larger or task-heavy spaces you may want a second fitting to keep brightness even.

How does the PIR sensor work?

The built-in PIR detects movement and switches the light on automatically, then turns it off again once the area is clear. This makes it well suited to hallways, stairwells and cloakrooms where hands-free operation is useful and a manual wall switch is less convenient.

Can the Tybia be used outdoors or in a bathroom?

No. It is rated IP20, which means it is for dry indoor use only, so it should be kept clear of bathrooms, porches and any damp or outdoor location. Choose a higher IP-rated fitting for those areas.

How do I clean the fitting?

Wipe the surface with a soft, dry or barely damp cloth once the light is switched off and cool, avoiding solvents or abrasive cleaners that could mark the black finish. Take care not to press on the sensor lens so detection stays accurate.