Tybia 320x320 25W Square LED Ceiling Light - Black

The Tybia is a square surface-mounted LED ceiling light that sits flush against the ceiling, drawing 25W and producing 2600 lumens of neutral white 4000K light. Its 110 degree beam spreads broadly rather than spotting, so a single fitting washes a room evenly without harsh pools. The light source is an integrated LED, so there is no separate bulb to replace over its working life. For US buyers this is the kind of flush mount LED ceiling light used in everyday rooms, here finished in black with a square aperture measuring 320 × 320 mm.

The square form and even spread make the Tybia a good fit for kitchens, hallways, utility rooms, landings and smaller bedrooms. At general lighting levels it covers around 9 m², which makes it well suited to a single compact room or as one of a pair across a longer space. Because it mounts directly onto the ceiling with no recess or drop, it works neatly where ceilings are low or where there is no void above for a recessed fitting. The neutral 4000K tone keeps task areas like worktops and sinks clearly lit without the warmth of a living-room glow. This fitting is rated IP20, so keep it to dry indoor rooms and clear of bathrooms, porches and any exposed location.

The body is aluminium alloy in a black finish, giving a solid square frame that holds its colour over time. It runs straight from a 220-240V AC mains supply with the driver built in, so installation is a direct ceiling fixing with no external transformer to house. The fitting is not dimmable, so pair it with a standard switch rather than a dimmer circuit. With an efficiency of 104 lm/W and a rated 30,000 hour lifespan, it is built for long service in regularly used rooms. The Tybia range includes further sizes and wattages if you need to match output across several rooms.

What size room does this ceiling light suit?

With 2600 lumens at 4000K, the Tybia covers around 9 m² at general lighting levels. That makes it a sensible single fitting for a compact kitchen, hallway, utility room or smaller bedroom. For larger or longer spaces, fitting two units spaced along the ceiling gives a more even result.

Does it use a replaceable bulb?

No, the LED is integrated into the fitting, so there is no separate bulb to change. The light source is rated for 30,000 hours of use, which is many years in a typical room. This keeps the profile slim and the light output consistent across the surface.

Can it be installed in a bathroom or outdoors?

No, the Tybia is rated IP20 and is for dry indoor use only. Keep it clear of bathrooms, porches and any damp or exposed location. It suits kitchens, hallways, landings and bedrooms where there is no direct water or moisture.

How do I clean it?

Switch the fitting off and let it cool, then wipe the black aluminium body and diffuser with a soft, dry or slightly damp cloth. Avoid abrasive cleaners or solvents, which can mark the finish. An occasional dust removal keeps the light output bright and even.