Tybia 320x320 25W LED Ceiling Light with PIR - Grey

The Tybia is a square LED ceiling light that runs 25W from a 220-240V AC supply and puts out 2600 lumens at a neutral 4000K white. A built-in PIR sensor switches the fitting on when it detects movement, so the light responds automatically as you enter a space rather than waiting for a switch. The 110 degree beam spreads evenly across the room from the 320 x 320 mm square body, and as a flush mount LED ceiling light it sits close to the ceiling line with no protruding fitting. The LED is integrated, so there is no separate bulb to replace over its 30,000 hour rated life.

Sitting on a single neutral-white output, the Tybia suits hallways, landings, utility rooms and entrance areas where hands-free switching earns its keep, covering around 9 m² at general lighting levels. The PIR makes it a good fit for short-stay spaces such as a stairwell or cloakroom, where the light only runs while someone is present. With its low 61 mm depth it works well on lower ceilings where a deeper pendant or bowl fitting would feel intrusive, and the 4000K tone keeps the area looking crisp and clear. As an IP20 fitting it is for dry interior rooms only and should be kept clear of bathrooms, damp areas and any exposed or covered outdoor positions.

The body is aluminium alloy in a grey finish, with the driver and PIR electronics housed inside the fitting so installation is a straightforward fixed ceiling mount. The light is not dimmable, which suits the motion-triggered, full-output way it is designed to work. At 1.51 kg it is light enough for standard ceiling fixings, and the square form sits flat against the surface. Niori stocks the Tybia alongside other Kanlux ceiling fittings, so matching units can be specified across connected rooms.

How does the PIR sensor work?

The Tybia has a built-in passive infrared sensor that detects movement and switches the light on automatically, then off again after the area is clear. This makes it well suited to hallways, landings and utility rooms where hands-free lighting is useful. The 2600 lumen output runs at full brightness when triggered.

What size room does it suit?

With 2600 lumens at 4000K, the Tybia covers around 9 m² at general lighting levels. That makes it a sensible single fitting for a hallway, small utility room or landing. Larger or task-heavy spaces may benefit from more than one unit.

Can the bulb be replaced?

No, the LED is integrated into the fitting rather than being a separate replaceable bulb. It is rated for 30,000 hours of use, so it should last many years in typical domestic settings. The whole fitting is replaced at the end of its life.

How do I clean it?

Switch the light off and let it cool, then wipe the surface with a soft, dry or slightly damp cloth. Avoid solvents or abrasive cleaners that could mark the grey aluminium finish or the diffuser. A gentle wipe keeps the light output and appearance consistent.