TP STRONG LED 1500x70 90W IP65 Batten 125110 deg Cool White - White

The TP Strong LED is a 1500mm linear batten that pushes out 12000 lumens of crisp 4000K cool white light from a single 90W fitting. Across the US market this style is the workhorse LED shop light, the wraparound surface fitting that lines a ceiling or wall in a continuous bright run. Its asymmetric 125° × 110° beam spreads light wide and even rather than spotting it, so the working plane below stays uniformly lit. At 133 lm/W it earns its output efficiently, and the fixed cool white tone keeps colours reading accurately for detailed tasks.

Built for garages, workshops, car parks and damp utility spaces, the TP Strong covers around 40 m² at general lighting levels, making it a strong choice for a single-car garage or a mid-sized workshop bay where you want shadow-free coverage. Mounted to the ceiling or a wall, it suits the kind of practical room heights found in outbuildings and storage areas. Several units can be set in a line to extend coverage across a longer span, and the wide beam means fewer fittings are needed to light a given floor area than a narrower spot arrangement would require.

The body is moulded plastic in a white finish, rated IP65 against dust and water jets and IK08 for impact resistance, so it stands up to wet, knock-prone environments. It runs direct from 220-240V AC mains and is not dimmable, which keeps the wiring simple for a switched utility circuit. Mounting is by surface fixing to ceiling or wall, with a rated lifespan of 50,000 hours from the integrated LED board. We stock the TP Strong range in other lengths and outputs to match larger spans.

Where is this batten suitable for use?

It is built for garages, workshops, car parks and damp utility areas. With its IP65 rating it copes with dust, moisture and water jets, so it works in unheated outbuildings and exposed sheltered locations as well as indoors.

Is it properly weatherproof for wet locations?

Yes. The IP65 rating means it is sealed against dust and protected from low-pressure water jets from any direction, which makes it suitable for exposed outdoor and wet sites. The IK08 rating also gives it solid resistance to knocks.

Can it be linked in a continuous run?

Several units can be installed in a line along a ceiling or wall to extend coverage across a longer space. Each fitting wires to the 220-240V AC mains supply, so plan the spacing around your circuit and the area you need lit.

How do I clean it?

Wipe the white housing and lens with a soft, slightly damp cloth once power is isolated. Avoid abrasive pads or solvents on the plastic body, and clearing dust off the lens periodically keeps the full 12000 lumen output reaching the floor.