TP Strong 1250x70 60W LED Batten Light IP65 8000lm 125110 deg Cool White - White

The TP Strong is a 60W linear LED batten putting out 8000 lumens at 4000K cool white, a clean neutral tone that keeps work surfaces and floors well lit without colour cast. The asymmetric beam reads as 125° × 110°, spreading light wide across the length of the fitting rather than pooling it under a single point. At 1250 × 67 × 62 mm it sits as a slim rectangular bar that mounts flush to a ceiling or wall. American buyers will recognise this format as an LED shop light or wraparound, the long surface fitting that lines a garage or workshop ceiling, here built to a sealed IP65 weatherproof standard rather than a dry-only spec.

Running at 133 lm/W, the TP Strong is suited to garages, workshops, car parks, stores and damp utility areas where a bright, even wash matters more than decorative effect. At general lighting levels it covers around 27 m², so a pair or a linked run handles a double garage or a small workshop bay comfortably. Mount it to a ceiling at standard height for broad floor coverage, or to a wall above a bench where the wide beam throws light forward across the working area. The IP65 rating means it copes with dust, splashes and the unheated, damp conditions of outbuildings and sheltered outdoor spots.

Construction is a plastic housing finished in white with an IP65 seal against dust and water ingress, backed by an IK08 impact rating for knock resistance in busy working spaces. The fitting runs direct from 220 to 240V AC mains and is not dimmable, giving consistent full output across its 50,000 hour rated life. It weighs 1.06 kg and fixes by ceiling or wall mounting. The TP Strong range includes other lengths and outputs for matching a longer run end to end.

Product Specification Sheet

Range Datasheet

Where is this batten suitable for use?

Its IP65 rating makes it suitable for garages, workshops, car parks, stores and damp utility rooms, as well as sheltered outdoor locations. The sealed housing keeps out dust and water splashes, so it copes with unheated and damp conditions that would defeat a standard indoor fitting.

Can several be linked together in a run?

The TP Strong range is designed for continuous installation, so multiple units can be lined up end to end along a ceiling to light a longer space evenly. Check the wiring arrangement for your chosen length, as linking is done through the mains connection rather than a plug-in link lead.

How long is it and how bright?

The fitting measures 1250 mm long and delivers 8000 lumens at 4000K cool white, with an efficiency of 133 lm/W. At general lighting levels that covers around 27 m², enough for a double garage or a small workshop bay.

How do I clean it?

Wipe the white housing with a soft, slightly damp cloth and a mild detergent, then dry it off. Avoid abrasive pads or solvents, which can dull the finish, and isolate the supply before cleaning if the fitting is within reach.