Description
The TP Slim TW is a 50W linear LED batten that pushes out 6000 lm of crisp 4000K cool white light along a slim 1580 mm body. American buyers will recognise the format as an LED shop light or wraparound fixture, the kind of long, even run that lines a workshop ceiling. The asymmetric 145° × 110° spread throws light wide across the floor while keeping the fitting low-profile at just 36.7 mm deep, and at 120 lm/W it makes efficient use of every watt drawn from a standard 220-240V AC supply.
Across roughly 20 m² at general lighting levels, a single batten gives a workshop, garage or utility space the kind of clean, shadow-free coverage that suits work at a bench or under a car. With an IP65 rating it copes happily with damp, dust and direct hosing, so it earns its place in a car park, an outbuilding or a covered loading bay as readily as a domestic garage. Run two or three end to end along a longer ceiling and the wide beam knits into one continuous band of light with no dark patches between fittings.
Built from a tough plastic housing in a plain white finish, the batten is sealed to IP65 against weather and grime and rated for 50,000 hours of service before any meaningful drop in output. It mounts directly to a ceiling or wall using the supplied fixings, sits flat against the surface, and runs straight off mains voltage with no separate driver to wire in. The fixed 4000K output is not dimmable, which keeps the electronics simple and reliable in the kind of working environments these are built for. The TP Slim TW range also includes other lengths and outputs for matching longer runs.
Specification
| Power |
50W |
| Voltage |
220-240 AC |
| Luminous flux |
6000 lm |
| Efficiency |
120 lm/W |
| Colour temperature |
4000K |
| Colour rendering (CRI) |
Ra 80 |
| Beam angle |
X145/Y110° |
| IP rating |
IP65 |
| Dimmable |
No |
| Mounting |
Ceiling Mounted, Wall Mounted |
| Lifespan |
50,000 hours |
| Shape |
Rectangular |
| Dimensions |
1580 × 36.7 × 47.7 mm |
| Weight |
536 g |
| Material |
Plastic |
| Finish |
White |
Downloads
Frequently Asked
Where is this batten typically used?
It suits garages, workshops, car parks, outbuildings and damp utility spaces where a long, even band of bright light is needed. The IP65 rating means it copes with dust, damp and direct water, so it works in covered outdoor and wet locations as well as indoors.
Can several be linked in a continuous run?
Yes, multiple battens can be installed end to end along a ceiling to cover a longer space. The wide 145° × 110° beam means the light from adjacent fittings overlaps cleanly, leaving no dark gaps between them.
How bright is it and what area does it cover?
It delivers 6000 lm of 4000K cool white at 50W, which lights around 20 m² at general lighting levels. That is enough for a single-car garage or a small workshop from one fitting.
How do I clean and maintain it?
Wipe the housing with a soft, damp cloth and a mild detergent, then dry it off; avoid solvents or abrasive cleaners that could mark the plastic. Because the IP65 seal keeps dust and moisture out of the internals, cleaning is limited to the outer surface.