TP Slim TW 1240x40 40W TW Batten 145110 deg IP65 Cool White - White

The TP Slim TW is a 40W LED batten light measuring 1240 × 36.7 × 47.7 mm, drawing 4800 lumens at a 4000K cool white tone. Across the Atlantic the same fitting is known as an LED shop light, a familiar sight along garage and workshop ceilings, and it works equally well as a wraparound-style linear fixture. The wide 145° × 110° asymmetric beam spreads light evenly along its length rather than pooling it, giving a clean, shadow-free wash over benches, shelving and walkways. Efficiency sits at 120 lm/W, so the output is reached without a heavy power draw.

This batten suits garages, workshops, car parks, utility rooms and storerooms where steady, practical light matters more than mood. At general lighting levels it covers around 16 m², which makes it a sensible single fitting for a one-car garage or a modest workshop, with a second unit added for longer runs. Mount it to a ceiling or wall at the height the space allows, keeping the long axis aligned with the work area below. Because it carries an IP65 rating it is fully weatherproof, so it copes with exposed outdoor positions, damp utility corners and wet areas without trouble.

Construction is a white plastic housing rated IP65 against dust and water jets, built around a fixed 4000K LED array rated for 50,000 hours. The fitting is not dimmable and runs on 220-240V AC mains. Mounting is by ceiling or wall fixings, and the slim 36.7 mm depth keeps it close to the surface in tight spaces. The colour rendering reaches Ra 80 and the unit weighs just 448 g, so installation is straightforward overhead. This batten sits within our wider Kanlux linear range alongside longer and higher-output options for larger runs.

Where is this batten typically used?

It is built for garages, workshops, car parks, utility rooms and storage areas where reliable, even light is needed. The IP65 rating also allows it to be used in damp and exposed outdoor locations. The wide beam spreads light along the length of the fitting for a consistent finish.

Is it weatherproof enough for outdoor and wet areas?

Yes. The IP65 rating means it is sealed against dust and protected against water jets, so it is suitable for fully exposed outdoor positions and wet utility spaces. It can be mounted under a carport, in a damp garage or in an open car park without issue.

Can these battens be linked together in a run?

Each TP Slim TW is wired to the 220-240V AC mains supply, so several can be installed in sequence along a ceiling to cover longer spaces. Spacing them gives an even wash across a workshop or garage. Each fitting at general lighting levels covers around 16 m².

How do I clean it?

Wipe the white housing with a soft, slightly damp cloth and a mild detergent, avoiding abrasive pads that could mark the plastic. Make sure the power is off and the fitting is cool before cleaning. The IP65 seal keeps dust and moisture out of the internals during normal use.