TP Slim 1540x40 50W LED Batten IP65 145110 deg Cool White - White

The TP Slim is a slimline LED batten light that runs at 50W and pushes out 6000 lumens of cool white 4000K light, giving a clean and even wash across a long run. At just 1540 by 36.7mm it keeps a low profile against the ceiling while the wide 145 by 110 degree beam spreads light across the full width of the space below. For anyone shopping the US market, this is the type sold as an LED shop light, the linked weatherproof fitting that lines up over a workbench or down a service aisle.

Built for working spaces, the TP Slim suits garages, workshops, stores and car parks, and its IP65 rating makes it equally at home in damp utility areas and sheltered outdoor spots. At general lighting levels its 6000 lumens cover around 20 m², so a single fitting handles a standard single garage or a modest store room, while several can be lined up end to end along a longer ceiling. With a 145 by 110 degree beam it throws light wide rather than narrow, which helps keep shadows down across benches and shelving.

The housing is moulded plastic in a plain white finish, sealed to IP65 so dust and water jets are kept out. The asymmetric beam measures 125 degrees by 110 degrees in practice, and the fitting can be ceiling mounted or wall mounted to suit the run you are lighting. It is not dimmable and is fixed at 4000K cool white, with an efficiency of 120 lm/W and a rated life of 50,000 hours, so it keeps drawing modest power across years of use. Other lengths and outputs sit alongside it in the TP Slim range if you need to match a longer or brighter run.

Where is this batten suitable for use?

The TP Slim is rated IP65, so it is sealed against dust and water jets. That makes it suitable for garages, workshops, car parks and damp utility areas, as well as sheltered outdoor positions where it may be exposed to the weather.

Can several be linked together in a run?

Battens of this type are commonly mounted end to end to light a longer space evenly. Wiring multiple units along a single run lets you cover a workshop or service aisle from one circuit, with each fitting throwing a wide 145 by 110 degree spread.

How much light does it give and what area does it cover?

It delivers 6000 lumens at 4000K cool white. At general lighting levels that covers around 20 m², which suits a single garage or a small store room from one fitting.

How should the fitting be cleaned?

Switch off the supply and let the unit cool, then wipe the white plastic housing with a soft damp cloth. Avoid solvents or abrasive cleaners, as these can mark the surface and the diffuser over time.