Description
The Tonil II is a slim LED wall light that throws a focused 30 degree beam, drawing just 3.3W to deliver 145 lumens of warm 3000K light. Its narrow shape, measuring 370 x 51 x 121 mm, suits a tidy linear wash rather than broad ambient cover. In the US this style sits with the indoor LED wall sconce category, where compact integrated fittings like this are valued for accent and feature work over a wide light spread.
Indoor settings suit it best: a hallway run, a stairwell, a living room feature wall or a bedside reading point where a controlled pool of light is wanted. With its tight 30 degree beam, expect a defined accent rather than full room coverage, so place it to graze a textured wall, mark a route or highlight artwork. Mount it at a height that keeps the beam working with the surface, and pair several along a corridor for an even rhythm of light.
Built from aluminium alloy in a black finish, the Tonil II carries an integrated LED rated for around 20,000 hours and weighs just 320 g, so it sits neatly on plasterboard or masonry. It is rated IP20, which means dry indoor use only, and is not dimmable, running directly from a 220 to 240V AC supply with the LED module fixed within the body. The range offers further wall fittings in this family for matching a scheme across rooms.
Specification
| Power |
3.3W |
| Voltage |
220-240 AC |
| Luminous flux |
145 lm |
| Efficiency |
44 lm/W |
| Colour temperature |
3000K |
| Colour rendering (CRI) |
Ra 80 |
| Beam angle |
30° |
| IP rating |
IP20 |
| Dimmable |
No |
| Mounting |
Wall Mounted |
| Lifespan |
20,000 hours |
| Dimensions |
370 × 51 × 121 mm |
| Weight |
320 g |
| Material |
Aluminium Alloy |
| Finish |
Black |
Downloads
Frequently Asked
Can the Tonil II be used outdoors?
No. It is rated IP20, which covers dry indoor use only. Keep it clear of porches, bathrooms and any damp or sheltered-outdoor location, and choose an IP44 or higher fitting for those areas.
Where does this wall light suit best?
It works well in hallways, stairwells, living rooms and bedrooms as an accent or feature light. The narrow 30 degree beam gives a controlled pool rather than broad room lighting, so it is ideal for grazing a wall or marking a route.
Does it take a separate bulb?
No, the LED is integrated into the body rather than using a replaceable lamp such as an E27. The module is rated for around 20,000 hours of use, so no bulb changes are needed during normal life.
How should the Tonil II be cleaned?
Switch it off and let it cool, then wipe the aluminium body and lens with a soft dry or slightly damp cloth. Avoid solvents or abrasive cleaners so the black finish stays even.