Tonic 3 Light Dimmable LED Bar Pendant - Chrome & Black 3000K

The Tonic is a 720mm bar pendant suspending three cylindrical polished chrome shades from a matt black linear canopy, each housing a dimmable GX53 LED at 3000K warm white. The three pendants hang evenly spaced along the bar on adjustable black cables, with drop length adjustable between 480mm and 2000mm during installation.

Designed for dining tables, kitchen islands and breakfast bars between 1.8-2.4m long, the Tonic provides task and ambient light across a linear surface. The 720mm bar length allows the three pendants to be positioned where light is needed most, with typical installation seeing the bar mounted 600-800mm above the table surface. The reflective chrome finish on each cylinder directs light downward while bouncing it off the internal surface, creating both focused illumination and a subtle upward glow.

The matt black bar and canopy provide visual weight at the ceiling, anchoring the three chrome pendants and creating contrast against white or light-coloured ceilings. The polished chrome cylinder finish pairs with both warm-toned and cooler contemporary interiors, and the 3000K colour temperature sits in the middle of the warm white spectrum—warmer than office lighting, cooler than traditional incandescent. The dimmable GX53 LEDs integrate into each pendant without visible bulbs or sockets protruding below the chrome cylinder, giving a clean lower edge.

Is the Tonic dimmable?

Yes. The integrated GX53 LEDs are dimmable when paired with a compatible LED dimmer switch. Dimmer compatibility depends on the specific dimmer model—confirm with the manufacturer or contact us before pairing to ensure smooth dimming performance.

What table length does this pendant suit?

The 720mm bar works well over dining tables or kitchen islands between 1.8-2.4m long. The three pendants are evenly spaced along the bar, providing distributed light across the surface rather than a single central point.

Can the drop height be adjusted after installation?

The drop is adjustable between 480mm and 2000mm during installation using the cable length. Once installed, changing the drop requires partial dismantling to re-route the cables through the canopy, so setting the correct height during fitting is recommended.

Are the GX53 LEDs replaceable?

GX53 LEDs are integrated into the fixture. If an LED fails during the warranty period, contact Mantra or the retailer. GX53 is a twist-and-lock fitting, so replacement is possible if compatible GX53 modules are available, but this is not a typical user-serviceable bulb change.