Description
The Tina is a 40cm circular pendant light with an integrated 18W LED, combining a white polycarbonate diffuser with a contrasting black central disc that houses the light source. The LED produces 860 lumens at 3000K, providing warm white light distributed evenly through the diffuser panel below.
Designed for dining tables, kitchen islands and hallways where overhead lighting is needed without excessive bulk, the Tina sits 215mm below the ceiling at minimum drop and can be extended to 2000mm using the adjustable cable system. The 40cm diameter suits rooms with 3-4m ceilings and table widths of 1.2-1.8m. The white ceiling rose conceals the cable entry and fits standard UK ceiling fixings.
The two-tone finish pairs a matt white outer ring with a black inner disc, creating a defined focal point when viewed from below. The disc shields the LED from direct view, reducing glare for seated diners while the diffuser spreads light downward and outward. At 1.7kg the fitting requires secure ceiling fixings but is light enough for plasterboard ceilings with appropriate anchors. The non-dimmable LED is rated for 3 years under the warranty.
The adjustable drop between 215mm and 2000mm covers a wide range of ceiling heights, so the pendant can hang close to a low ceiling or drop well down over a table in a taller room. This flexibility means the same fitting works whether the ceiling is standard height or above 2.4m. The 700 to 900mm gap often used above a dining table can be reached by adjusting the cable during installation, keeping the light out of eye line while lighting the surface below. The 40cm diameter keeps the fitting in proportion above a table rather than overwhelming it.
Specification
| Colour Finish 1 |
White |
| Colour Finish 2 |
Black |
| Diameter |
400mm |
| Minimum Drop |
215mm |
| Maximum Drop |
2000mm |
| Number Of Bulbs |
1 |
| Lamp Socket |
Integrated LED |
| Colour Temperature |
3000K Warm White |
| Lumen |
860lm |
| Power Consumption |
18W |
| Voltage |
220-240V~50/60Hz |
| Dimmable |
No |
| Weight |
1.7KG |
| Warranty |
3 Year |
Frequently Asked
Is the Tina dimmable?
No. The integrated 18W LED is non-dimmable and must be connected to a standard switched circuit only.
What ceiling height is needed?
The minimum drop is 215mm, so the pendant sits close to the ceiling when fully shortened. For typical installation above a dining table or island, the drop is adjusted to 700-900mm from the ceiling, which works well in rooms with ceiling heights of 2.4m or above.
How is the drop adjusted?
The cable length is adjustable during installation up to a maximum of 2000mm. Once the desired drop is set, excess cable is concealed within the ceiling rose.
What light output does it provide?
The 18W LED produces 860 lumens at 3000K warm white. This provides general task lighting suitable for a dining table seating 4-6 people or a kitchen island work surface up to 1.8m long.