Tahiti XL LED Wall Light 12W 3000K - White

The Tahiti XL is a 260mm-wide white LED wall light built from three overlapping rectangular panels that step outward from the wall, with integrated 12W LEDs casting warm 3000K light through the gaps between the layers. The white powder-coated metal finish runs across all three panels, and the 55mm projection creates subtle shadowing on the wall behind depending on the angle of ambient light in the room.

Designed for hallways, bedrooms and landings where wall space is limited or where you need accent lighting without the bulk of a larger fixture, the Tahiti XL mounts directly to a standard UK wall box and sits low-profile enough to work above picture rails, in alcoves or in corridors where deeper projecting fittings might obstruct movement. The 1080 lumens output is comparable to a 75W incandescent bulb but spread across the layered panel design rather than focused from a single point.

The layered rectangular geometry gives the fitting a Mondrian-like abstraction that works in modern, Scandinavian and minimal interiors without introducing strong colour or ornamentation. At 1kg the fitting can be mounted on standard plasterboard with appropriate fixings, and the white finish pairs neutrally with white, grey and pastel wall colours. The non-dimmable LED has a rated lifespan of approximately 25,000 hours, equating to around 11 years at typical residential use of 6 hours per day.

The three-panel arrangement spreads the 1080 lumens across a wider surface than a single-point fitting, softening the light rather than concentrating it. At 12W the running cost stays low over the 25,000 hour rated life, and the 55mm projection keeps the fitting close to the wall.

Is the Tahiti XL dimmable?

No. The integrated LED runs at a fixed 12W output and is not compatible with dimmer switches. For dimmable wall lighting, consider the range of switched or dimmable LED wall lights available elsewhere in the range.

How is it installed?

The Tahiti XL mounts directly to a standard UK wall box via a rear-mounted bracket. The fitting weighs 1kg, so standard plasterboard fixings are adequate for solid wall installation. Wiring connects to mains 230V supply via a terminal block inside the mounting bracket.

What light output does 1080 lumens provide?

1080 lumens is roughly equivalent to a traditional 75W incandescent bulb. In practical terms, the Tahiti XL provides enough light to illuminate a 3-4m hallway section or act as bedside accent lighting without needing a table lamp.

Can multiple units be used together?

Yes. The compact 260mm width allows two or three Tahiti XL units to be spaced along a hallway or stairwell at 800-1000mm intervals to create a rhythmic architectural feature while providing functional illumination along the route.