Stella Round Pleated Lampshade - Black 35/40cm x 26.3cm

The Stella is a round pleated fabric lampshade in black, measuring 35/40cm diameter at the base tapering to 26.3cm height. The shade is constructed from knife-pleated fabric over a wire frame, with each pleat running vertically from top rim to bottom edge. The pleating creates a textured surface that diffuses light through the gaps between folds rather than through the fabric itself, softening the brightness of the bulb while casting subtle shadow lines onto surrounding surfaces.

Designed to fit medium to large table lamp bases or pendant lamp holders, the Stella works in living rooms, bedrooms and dining areas where a deeper shade is needed to balance the proportions of a tall lamp base or to provide adequate downward coverage over a side table. The shade ships with a reducer ring, allowing it to fit lamp holders with different diameter top apertures. The 100W maximum rating accommodates both LED and traditional bulbs, though most users pair it with a 10-15W LED to avoid overheating the fabric.

The black fabric absorbs rather than reflects light, directing the majority of output downward and through the pleats. This makes the Stella more suitable for task or accent lighting than ambient room lighting. The pleated structure also gives the shade a sculptural quality when unlit, adding texture to the room during daylight hours. At 0.55kg the shade is light enough to be supported by most table lamp bases without tipping, though very narrow bases under 15cm diameter may need additional weight at the foot.

What fittings does the shade work with?

The Stella includes a reducer ring and fits most standard table lamp harp fittings and pendant lamp holders. The top aperture diameter is adjustable using the included ring to match different holder sizes.

How does the pleating affect the light output?

The vertical pleats create gaps that allow light to escape between the folds rather than passing through the fabric. This diffuses the light and creates subtle shadow patterns, but because the fabric is black most light is directed downward rather than out through the sides.

Can this shade be used on a pendant light?

Yes. The shade is suitable for pendant fittings as well as table lamps. When used on a pendant the 26.3cm height provides good coverage for E27 bulbs, preventing glare from below.

How is the pleated fabric maintained?

Dust can be removed using a soft brush attachment on a vacuum cleaner set to low suction, working gently between the pleats. Avoid pressing hard on the pleats as this can flatten or crease the fabric. Spot cleaning is not recommended as water may leave marks on the black fabric.