Description
A neat white square that sits almost level with the ceiling line, deep enough only to carry the lampholder behind its face. The trim measures 93mm to a side, so it reads as a small bright point rather than a fitting anyone stops to look at. One GU10 lamp does the work, and the lampholder is already fitted, so all it wants is a reflector lamp of your choosing. With so little depth to the housing, the light comes forward cleanly with no deep bezel to crop it.
We reach for these where a line of ceiling lights needs to stay quiet: kitchen ceilings, a hallway with several in a row, a landing, or a wash of light along a chimney breast. The square face sits well in rooms with squared-off joinery and tiled edges, where a circle can look adrift. Lamps up to 12W are accepted, which covers any LED reflector you are likely to buy, and dimming works so long as the lamp is a dimmable type and you are running it from a dimmer. Keep it to dry rooms indoors; a shower room or a covered porch asks for something sealed instead.
The fitting is double insulated, which is worth knowing if you are replacing older gear. It carries a two year warranty. Cleaning asks very little: switch the power off, let the lamp go cold, then run a dry cloth over the white face and around the edge, keeping polishes and scouring pads away from it. We stock the same square outline in black, and a round flush version if the softer shape suits the room better. There are funnel-fronted spotlights in the range too, for light angled off a wall. Lamps are not included.
Specification
| Colour |
White |
| Ceiling Mountable |
Yes |
| Wall Mountable |
Yes |
| Weight |
0.05KG |
| Length |
93mm |
| Width |
93mm |
| Height |
29mm |
| Cut Out (mm) |
75mm |
| Materials Used |
Polycarbonate |
| Energy Class |
A++ to B |
| Max Energy Class |
A++ |
| Min Energy Class |
B |
| Lamp |
1 x GU10 12W max (lamps not included) |
| Lamp Cap |
GU10 |
| Recommended Lamp |
LED (50mm Reflector) |
| Light Distribution |
Down |
| Protection Class |
Class 2 - Double Insulated |
| Total Power Consumption (W) |
Dependent On Lamps Used (±5%) |
| Input Voltage (V) |
100-240V~50/60Hz |
| Dimmable |
Yes - Dimmable Lamps Required |
| Dimmer Included |
No |
| IP Rating |
IP20 |
| Warranty |
2yrs |
| UKCA/CE |
Yes |
| Pieces Included |
1 |
| Installation |
Requires Installation By Qualified Electrician |
| Sloped Ceiling Compatible |
Yes |
| Sloped Ceiling Adapter Required |
No |
| Product Care |
(1) Wipe clean with a dry cloth, do not use any cleaning detergents, do not use rough or coarse material to clean. (2) Ensure light is not illuminated when cleaning. |
| Country of Origin |
China |
Frequently Asked
What size aperture does it need?
The cut out is 75mm, with a 93mm square trim covering the edge.
How deep is the fitting?
It stands 29mm deep, one of the shallower GU10 fittings we sell.
Which lamp should I buy for it?
A GU10 LED reflector of 50mm diameter, rated up to 12W. Lamps are supplied separately.
Can I dim it?
Yes, provided you fit a dimmable GU10 lamp and pair it with a suitable dimmer. Neither is included.
Is it suitable for a bathroom?
No. It is rated IP20, so it belongs in dry rooms away from steam and splashing.
What warranty does it have?
Two years from the manufacturer.