Description
This is a small square fitting in black, sitting close to the ceiling line with a GU10 lamp held behind its open face. The trim measures 93mm across and the body behind it is shallow, so there is very little to read from below. Lamps up to 12W are allowed, and a reflector LED is the sensible choice for something this compact. Dimming is possible if you fit a dimmable lamp and pair it with a suitable dimmer, neither of which comes with the fitting.
We reach for these where a pendant would hang too low: hallways, landings, a boot room, a low-ceilinged bedroom, or along the working part of a kitchen. It gives a neat pool of light over a worktop or a doorway, and a run of them spaced down a corridor reads as a proper scheme rather than a line of holes. The same fitting can be put to work on a wall, which helps in narrow spaces where you want light pushed up or down. It belongs in dry indoor rooms, so keep it clear of shower areas and anywhere steam gathers.
The square trim is finished in black and the lampholder arrives already in place, so the lamp is the only extra to buy. To keep it looking right, switch off at the wall, give the lamp time to cool, then run a dry cloth across the black face; sprays and solvents will mark it, so leave those in the cupboard. It carries a two year warranty. We stock the square flush fitting in white as well, and there is a round flush version in white, plus funnel centre and angled funnel shapes in both round and square, each offered in black or white. Lamps are not included.
Specification
| Colour |
Black |
| Ceiling Mountable |
Yes |
| Wall Mountable |
Yes |
| Weight |
0.05KG |
| Length |
93mm |
| Width |
93mm |
| Height |
29mm |
| Cut Out (mm) |
75mm |
| Materials Used |
Polycarbonate |
| Energy Class |
A++ to B |
| Max Energy Class |
A++ |
| Min Energy Class |
B |
| Lamp |
1 x GU10 12W max (lamps not included) |
| Lamp Cap |
GU10 |
| Recommended Lamp |
LED (50mm Reflector) |
| Light Distribution |
Down |
| Protection Class |
Class 2 - Double Insulated |
| Total Power Consumption (W) |
Dependent On Lamps Used (±5%) |
| Input Voltage (V) |
100-240V~50/60Hz |
| Dimmable |
Yes - Dimmable Lamps Required |
| Dimmer Included |
No |
| IP Rating |
IP20 |
| Warranty |
2yrs |
| UKCA/CE |
Yes |
| Pieces Included |
1 |
| Installation |
Requires Installation By Qualified Electrician |
| Sloped Ceiling Compatible |
Yes |
| Sloped Ceiling Adapter Required |
No |
| Product Care |
(1) Wipe clean with a dry cloth, do not use any cleaning detergents, do not use rough or coarse material to clean. (2) Ensure light is not illuminated when cleaning. |
| Country of Origin |
China |
Frequently Asked
What lamp does it take?
One GU10 lamp, up to 12W. A 50mm reflector LED is the recommended type. The lampholder is supplied, but the lamp is bought separately.
Can it be dimmed?
Yes, provided you fit a dimmable GU10 lamp and use a dimmer switch compatible with it. No dimmer is supplied.
What are the sizes?
The face is 93mm square with a height of 29mm, and the aperture it needs is 75mm across.
Is it suitable for a bathroom?
It is rated IP20, so it should be kept to dry rooms rather than bathroom zones or covered outdoor areas.
How should it be cleaned?
With the power off and the lamp cool, wipe the black face with a soft dry cloth. Avoid polishes, sprays and solvent cleaners.
Is there a warranty?
It carries a two year warranty.