Sphere 1 Light Wall Light With Switch - Satin Nickel

The Sphere is a single-arm wall light in satin nickel with a built-in switch mounted on the circular backplate and a stepped glass shade that combines frosted inner layers with clear outer ribs. The G9 bulb fitting (sold separately) sits inside the 110mm-wide glass globe, with the ribbed construction creating horizontal bands of diffused light across the shade surface when lit.

Designed for bedside positions, hallway corridors and living room reading spots where direct wall switching is preferred over relying on a distant door switch, the Sphere projects 154mm from the wall on a curved satin nickel arm. The built-in rocker switch sits on the backplate itself, allowing the light to be turned on and off without reaching for a separate pull cord or wall switch panel. The 125mm height keeps the fitting compact enough for narrower hallways and beside headboards without protruding into head clearance.

The satin nickel finish shows a brushed texture that reduces reflections and pairs with both warm and cool colour schemes. The stepped glass construction uses frosted internal sections to soften glare from the G9 bulb, while the outer clear ribs retain some brightness and visual definition. The light is dimmable when paired with a dimmable G9 bulb and a compatible wall dimmer (dimmer sold separately), giving control over light levels for evening reading or ambient hallway lighting.

What bulb does it take?

The Sphere takes a single G9 capsule bulb up to 33W. Bulbs are sold separately. Most users pair this with a 3-5W G9 LED in 2700K-3000K warm white for bedside reading or hallway ambient light.

Is the built-in switch easy to reach from a bed?

Yes. The rocker switch sits on the circular backplate at the wall, approximately 154mm out from the wall surface on the arm. When mounted at typical bedside height (1.2-1.4m from floor level), the switch is within comfortable reach without leaning forward.

Can it be dimmed?

The fitting itself is dimmable when paired with a dimmable G9 bulb and a compatible wall dimmer switch controlling the circuit. The built-in switch on the backplate is an on/off rocker only, not a dimmer control.

What hallway width does it suit?

The 154mm projection from the wall makes this suitable for hallways 900mm wide or wider, where the fitting will not obstruct passage. In narrower hallways under 800mm, the projection may intrude into the walkway.