Sola 0.8W LED Step Light 12V Warm White - Black

The Sola is a compact recessed step light that drops into the wall to mark indoor stairs, hallways and low-level routes. It draws just 0.8W from a 12V DC supply and gives 13 lumens of warm white light at 3000K, a low, glare-free wash rather than a broad room light. In the US this style of low-level fitting is usually called a step light too, set into the wall at ankle or shin height to pick out the edge of each tread. The round face measures 70mm across and sits flush once installed.

Indoor stairwells, landings and corridors are the natural home for this fitting, where a gentle warm glow keeps the steps visible at night without flooding the space. Because it puts out 13 lumens, it works as wayfinding and edge-marking rather than ambient room lighting, so it suits being grouped along a run of stairs or spaced down a passage. Mount it low on the wall, typically a step or two up from the floor, so each light catches the tread below it. The warm 3000K tone keeps the effect soft and unobtrusive in living areas and hallways.

Built from polished stainless steel and plastic with a black finish, the Sola recesses into the wall via a round 70mm aperture and weighs only 66g. It carries an IP20 rating, so keep it to dry indoor positions and clear of bathrooms, porches and any damp or outdoor spots. The fitting is not dimmable and runs on a 12V DC supply, so a suitable transformer is needed. Rated for 50,000 hours, it is a low-maintenance way to light a staircase. Other tones and finishes sit within the wider Sola range.

Does the Sola need a transformer?

Yes. It runs on a 12V DC supply, so it needs a suitable 12V transformer or driver rather than connecting directly to the mains. Size the transformer to cover the total wattage of every light on the circuit.

Can it be used outdoors or in a bathroom?

No. The Sola is rated IP20, which means dry indoor use only. Keep it clear of bathrooms, porches, gardens and any damp or sheltered-outdoor location, and choose a higher-rated fitting for those areas.

How is it installed?

It is a recessed wall fitting that sits flush into a round 70mm aperture. For step lighting, mount it low on the wall, typically a step or two above the floor, so the light falls across the tread below.

How do I clean it?

Wipe the face gently with a soft, dry or slightly damp cloth to clear dust and marks. Avoid harsh solvents or abrasive cleaners so the black finish and lens stay clear.