Description
The Sisley is a 700mm horizontal LED bathroom wall light with a chrome finish and frosted acrylic diffuser, housing an integrated 12W LED strip that delivers 950 lumens at 4000K. The IP44 rating protects the fitting against splashes from any direction, making it suitable for bathroom zones 2 and 3 including above mirrors, alongside vanities and on walls adjacent to showers.
Designed for mounting above bathroom mirrors or along vanity walls, the 700mm length provides even light distribution across a typical 600-900mm wide mirror or basin area. The frosted diffuser softens the LED strip behind it, eliminating visible diodes and reducing glare when viewed directly. The 220mm projection from the wall gives clearance above a mirror that typically sits 50-100mm proud of the wall surface, with the light angled down towards the basin area.
The chrome-plated metal frame and frosted white acrylic combine for a clean, minimalist appearance that pairs with chrome taps, shower rails and heated towel rails common in modern bathrooms. The 4000K colour temperature sits between warm white and daylight, providing neutral illumination that renders skin tones accurately for grooming tasks without the yellow cast of warmer LEDs or the clinical harshness of daylight-temperature fixtures.
The integrated LED is non-replaceable and rated for approximately 25,000 hours of operation, equating to around 11 years at 6 hours daily use. The fitting draws 12W on 100-240V mains and is not dimmable. Installation requires connection to a suitable IP-rated bathroom circuit with either a pull-cord switch or an external wall switch outside the bathroom zone.
Specification
| Colour Finish 1 |
Silver |
| Colour Finish 2 |
Frosted White |
| Width |
700mm |
| Height |
150mm |
| Projection |
220mm |
| Number Of Bulbs |
1 |
| Lamp Socket |
Integrated LED |
| Colour Temperature |
4000K Cool White |
| Lumen |
950lm |
| Power Consumption |
12W |
| Voltage |
100-240V~50/60Hz |
| Dimmable |
No |
| IP Rating |
IP44 |
| Weight |
1KG |
| Warranty |
3 Year |
Frequently Asked
What bathroom zones is the Sisley suitable for?
The IP44 rating makes it suitable for bathroom zones 2 and 3, which includes walls adjacent to baths and showers, and general bathroom wall areas outside the immediate shower enclosure. It is not rated for zone 0 or 1 (inside a shower enclosure or directly above a bath).
Is the LED replaceable?
No. The LED strip is integrated into the fitting and cannot be replaced. The LED is rated for approximately 25,000 hours, which equates to around 11 years at 6 hours of daily use before significant light degradation occurs.
Can it be used with a dimmer switch?
No. The integrated LED driver is not dimmable. The fitting operates at full brightness when switched on and should be connected to a standard on/off switch circuit.
What mirror width does the 700mm length suit?
The 700mm fixture provides even light distribution across mirrors between 600mm and 900mm wide when mounted centrally above the mirror. For wider mirrors, consider using two Sisley fittings spaced evenly, or selecting a longer fixture from the range.