Free Delivery on all orders over £99*

Single Phase Track Lighting Spring Holder - Silver

£499
The RRP is the manufacturer's recommended retail price of the item.
Limited Stock
We are an Independent UK Company
Price match. Found it cheaper? Contact us
Trade Discount Available
Description

The Maytoni TRA002HR-11B is a single-phase track lighting spring holder built from metal with a silver finish, designed to secure lighting fixtures onto single-phase track rails. The built-in spring mechanism applies consistent clamping pressure to hold track heads in position, preventing movement under normal use while still allowing manual repositioning when needed.

Used in residential, retail and office track lighting systems, the holder sits inside the track rail and clips onto the back of compatible track heads. Installation requires sliding the holder into the track channel, positioning it where the fixture is needed, and engaging the spring lock to prevent lateral movement. The compact 37mm height, 45mm length and 32mm width fit standard single-phase track profiles without obstructing adjacent holders or causing fixture overlap.

The silver metal construction resists corrosion in typical indoor environments and the IP20 rating confirms suitability for dry locations away from direct water exposure. The spring mechanism is built into the holder body rather than requiring separate components, which simplifies stock management for multi-fixture installations and reduces the chance of losing small parts during fitting.

Specification
Height 3.7cm
Length 4.5cm
Width 3.2cm
Finish Silver
Construction Metal
IP Rating IP20
Warranty 2 Year Guarantee
Downloads

Product Manual

Frequently Asked

What track systems is this holder compatible with?

The holder is designed for single-phase track rails, which are the most common type in residential and retail installations. It will not fit three-phase or two-circuit track systems. Check your existing track rail profile against the dimensions in the Specification table to confirm compatibility.

Can the holder be repositioned after installation?

Yes. The spring mechanism allows manual repositioning by releasing the clamp pressure, sliding the holder along the track rail to the new position, and re-engaging the lock. This is useful when adjusting fixture spacing or changing room layouts.

Is the holder sold individually or in packs?

This product is sold as a single holder. For multi-fixture installations, order one holder per track head being fitted. The compact dimensions allow multiple holders to be installed on the same track rail without interfering with adjacent fixtures.

What is the IP20 rating suitable for?

IP20 confirms the holder is suitable for dry indoor locations such as living rooms, retail showrooms, offices and corridors. It is not rated for bathrooms, kitchens near sinks, or any outdoor use where moisture or direct water contact could occur.

Shipping & Returns

Free worldwide delivery

Free worldwide delivery on all orders over £99. International orders for third-party brand products may be subject to an additional courier surcharge based on volumetric weight, particularly on larger lighting fixtures — if a surcharge applies, our team will email you with the amount before dispatch and you can proceed or cancel for a full refund. See full delivery terms.

Returns

30-day returns window from delivery. As all our products are electrical or lighting goods, returned items must be inspected and recertified by a qualified electrician before resale — the cost of this inspection (25–40% of the item value) is deducted from your refund. Customers pay return shipping. Made-to-order, special-order and clearance items cannot be returned. See full returns policy.

You Might Also Like

Recommended For You

    Our Reviews

    From first click to final installation, our customers share how Niori lights up their spaces. Read their words and envision what’s possible for yours.

    Featured Projects

    Step into our portfolio and see how we transform homes, restaurants, and commercial spaces and more, worldwide. Click here for a closer look at our latest projects.

    Description

    The Maytoni TRA002HR-11B is a single-phase track lighting spring holder built from metal with a silver finish, designed to secure lighting fixtures onto single-phase track rails. The built-in spring mechanism applies consistent clamping pressure to hold track heads in position, preventing movement under normal use while still allowing manual repositioning when needed.

    Used in residential, retail and office track lighting systems, the holder sits inside the track rail and clips onto the back of compatible track heads. Installation requires sliding the holder into the track channel, positioning it where the fixture is needed, and engaging the spring lock to prevent lateral movement. The compact 37mm height, 45mm length and 32mm width fit standard single-phase track profiles without obstructing adjacent holders or causing fixture overlap.

    The silver metal construction resists corrosion in typical indoor environments and the IP20 rating confirms suitability for dry locations away from direct water exposure. The spring mechanism is built into the holder body rather than requiring separate components, which simplifies stock management for multi-fixture installations and reduces the chance of losing small parts during fitting.

    Specification
    Height 3.7cm
    Length 4.5cm
    Width 3.2cm
    Finish Silver
    Construction Metal
    IP Rating IP20
    Warranty 2 Year Guarantee
    Downloads

    Product Manual

    Frequently Asked

    What track systems is this holder compatible with?

    The holder is designed for single-phase track rails, which are the most common type in residential and retail installations. It will not fit three-phase or two-circuit track systems. Check your existing track rail profile against the dimensions in the Specification table to confirm compatibility.

    Can the holder be repositioned after installation?

    Yes. The spring mechanism allows manual repositioning by releasing the clamp pressure, sliding the holder along the track rail to the new position, and re-engaging the lock. This is useful when adjusting fixture spacing or changing room layouts.

    Is the holder sold individually or in packs?

    This product is sold as a single holder. For multi-fixture installations, order one holder per track head being fitted. The compact dimensions allow multiple holders to be installed on the same track rail without interfering with adjacent fixtures.

    What is the IP20 rating suitable for?

    IP20 confirms the holder is suitable for dry indoor locations such as living rooms, retail showrooms, offices and corridors. It is not rated for bathrooms, kitchens near sinks, or any outdoor use where moisture or direct water contact could occur.

    Shipping & Returns

    Free worldwide delivery

    Free worldwide delivery on all orders over £99. International orders for third-party brand products may be subject to an additional courier surcharge based on volumetric weight, particularly on larger lighting fixtures — if a surcharge applies, our team will email you with the amount before dispatch and you can proceed or cancel for a full refund. See full delivery terms.

    Returns

    30-day returns window from delivery. As all our products are electrical or lighting goods, returned items must be inspected and recertified by a qualified electrician before resale — the cost of this inspection (25–40% of the item value) is deducted from your refund. Customers pay return shipping. Made-to-order, special-order and clearance items cannot be returned. See full returns policy.